TS247-6-axis automated ultrasonic inspection of failure critical peeled bar steel billets

TS247-6 轴自动超声检测失效关键去皮棒钢坯

• 批准号: 101266
• 金额: $ 40.95万
• 依托单位: TECHNICAL SOLUTIONS 247 LIMITED
• 依托单位国家: 英国
• 项目类别: Collaborative R&D
• 财政年份: 2012
• 资助国家: 英国
• 起止时间: 2012 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=101266
• 关键词: TS247; axis; automated; ultrasonic; inspection

Technical Solutions 24 Seven and Peak NDT are undertaking a collaborative project to develop a novel method for the complete inspection of stage one metallic billets, eliminating the requirement for the pre-inspection machining phase. This project joins the programming and motion control expertise of the Stoke-On-Trent based engineering firm with the award winning Phased Array capabilities of Derby based Peak. The detection of flaws in metallic billets is of crucial importance to supply businesses within the energy and rapidly gowing aerospace supply sector as a result of the critical impact of the installation of inadequate equipment. A successful project will enable the elimination of a considerable cost for producers to these industries by ensuring flaws are detected at the earliest possible stage. This also has positive impacts for supply firms, aerospace manufacturers and the environment - through reduced wastage and energy use in raw material production.

技术解决方案24 Seven和Peak NDT正在进行一个合作项目，以开发一种新的方法来完成对第一阶段金属坯料的检测，从而消除对预检加工阶段的要求。该项目将特伦特河畔斯托克工程公司的编程和运动控制专业知识与德比匹克公司屡获殊荣的相控阵能力结合在一起。由于设备安装不足的严重影响，检测金属坯料中的缺陷对于能源和航空航天供应部门内的供应企业至关重要。一个成功的项目将确保在尽可能早的阶段发现缺陷，从而消除生产者对这些行业的相当大的成本。这也对供应公司、航空航天制造商和环境产生了积极影响--减少了原材料生产中的浪费和能源消耗。