Improving abrasive wear of equipment for dairy sand bedding stalls

改善乳品砂垫层设备的磨料磨损

• 批准号: 462136-2013
• 负责人: Hassan, Marwan
• 金额: $ 1.81万
• 依托单位: University of Guelph
• 依托单位国家: 加拿大
• 项目类别: Engage Grants Program
• 财政年份: 2013
• 资助国家: 加拿大
• 起止时间: 2013-01-01 至 2014-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=542883
• 关键词: Improving; abrasive; wear; equipment; dairy

This work aims to characterize the abrasive behavior of support plate material. Both dry and wet sand wheel abrasion tests will be carried out at a range of speeds. The investigation will be conducted experientially for different support plate materials and various loads. This will reveal the sensitivity of the amount of wear to variations in the sliding velocity, the sand dryness, and the loads. An empirical relationship will be developed that describes the wear with respect to the above-mentioned parameters. The results will be used to redesign the support plate material and its configuration.

这项工作的目的是表征支撑板材料的磨损行为。干、湿砂轮磨损试验将在一定速度范围内进行。研究将针对不同的支撑板材料和各种载荷进行经验性的研究。这将揭示磨损量对滑动速度、砂干度和载荷变化的敏感性。将开发一个经验关系，描述相对于上述参数的磨损。研究结果将用于重新设计支撑板材料及其结构。