Paper-Based Lithium-Ion Batteries Using Carbon Nanotube-Coated Wood Microfibers
Paper-Based Lithium-Ion Batteries Using Carbon Nanotube-Coated Wood Microfibers
复制标题
DOI：
10.1109/tnano.2013.2252922
复制
发表时间：
2013-05-01
影响因子：
2.4
通讯作者：
Varahramyan, Kody
中科院分区：
文献类型：
--
作者：
Aliahmad, Nojan;Agarwal, Mangilal;Varahramyan, Kody
已经开发了使用柔性纸基集流体的锂离子电池。这些集流体由木质微纤维制成，木质微纤维通过静电逐层纳米组装工艺涂有碳纳米管（CNT）。所提出的（CNT-微纤维纸）集流体的碳纳米管质量负载为10.1 μ g/cm（2）。用集电器制成的电池的容量对于锂钴氧化物（LCO）半电池为150 mAh/g，对于锂钛氧化物（LTO）半电池为158 mAh/g，并且对于LTO/LCO全电池为126 mAh/g。的CNT微纤维纸集流体的制造方法，电池的组装，和实验结果的介绍和讨论。
Lithium-ion batteries using flexible paper-based current collectors have been developed. These current collectors were fabricated from wood microfibers that were coated with carbon nanotubes (CNT) through an electrostatic layer-by-layer nanoassembly process. The carbon nanotube mass loading of the presented (CNT-microfiber paper) current collectors is 10.1 mu g/cm(2). The capacities of the batteries made with the current collectors are 150 mAh/g for lithium cobalt oxide (LCO) half-cell, 158 mAh/g for lithium titanium oxide (LTO) half-cell, and 126 mAh/g for LTO/LCO full-cell. The fabrication approach of the CNT-microfiber paper current collectors, the assembly of the batteries, and the experimental results are presented and discussed.