Environmental Conditions and Test Procedures for Airborne Equipment - A Comprehensive guide to Aircraft Systems Designers
Environmental Conditions and Test Procedures for Airborne Equipment - A Comprehensive guide to Aircraft Systems Designers
复制标题
机载设备的环境条件和测试程序 - 飞机系统设计师综合指南
DOI：
--
复制
发表时间：
1996
期刊：
影响因子：
--
通讯作者：
N. Murthy
中科院分区：
文献类型：
--
作者：
C. Madhavan;D. N. Rao;N. Murthy
航空设备的环境条件和测试程序是航空无线电技术委员会的标准文件，描述了民用飞机航空电子系统的各种测试程序。对这些测试程序进行详细的研究和分类是选择航空电子仪器的必要条件。在飞机中，飞机上和飞机内的设备处于不同的环境条件下。根据此要求，应选择13;适合要求的不同类别的设备，并测试13;"确定是否符合设备性能标准"。13;本文件描述了航空无线电技术委员会13; 160-B和160-C（RTCA 160-B和RTCA 160-C），以全面的方式13;一般环境条件和试验程序，特别是13;轻型飞机。要进行23项试验，根据设备在飞机上或机内的位置，为每种设备选择13个类别。根据位置，可以确定环境条件，并进行类别选择。这种类型的选择将有助于减少认证程序。
Environmental conditions and test procedures for airborne13; equipment is a standard document from -Radio Technical Commission for13; Aeronauticsquot;, describing the various test procedures of avionic systems13; of civilian aircraft. A detailed study and the classification of these13; test procedures is a must for selection of avionic instruments. In an13; aircraft there are equipments on and inside the aircraft at different environmental conditions. As per this the equipments are to be selected13; for different categories suitable to the requirements and tested for13; quot;determining compliance with equipment performance standardquot;.13; This document describes Radio Technical Commission for Aeronautics13; 160-B and 160-C (RTCA160-B and RTCA160-C) in a comprehensive manner13; for environmental conditions and test procedures in general and for13; Light Aircrafts in particular. There are 23 tests to be conducted and13; categories are to be selected for each equipment depending upon the13; position in which the the equipment is located in or on the aircraft.13; From the position the environmental conditions can be determined and a13; category selection can be made. This type of selection will help in13; reducing the Certification procedures.