Electroosmotic flow through polymer electrolyte membranes in PEM fuel cells
Electroosmotic flow through polymer electrolyte membranes in PEM fuel cells
复制标题
DOI：
10.1016/j.jpowsour.2004.08.018
复制
发表时间：
2005-01-10
影响因子：
9.2
通讯作者：
Li, X
中科院分区：
文献类型：
--
作者：
Karimi, G;Li, X
Water management is critically important for polymer electrolyte membrane fuel cells (PEMFC), and is complicated by the electroosmotic flow of water from anode to cathode through the polymer electrolyte membrane. In this study, electroosmotic flow in polymer electrolyte membranes is modeled incorporating the electrokinetic effect, and key parameters affecting the PEM fuel cell performance are identified. The governing Poisson-Boltzmann and the Navier-Stokes equations were solved numerically for a single membrane pore to determine the electroosmotic flow through the membrane over a wide range of geometrical and operating conditions. It was found that the electroosmotic drag coefficient, Kp(Drag), increases with the pore diameter. The membrane thickness has a significant effect on the electroosmotic flow. At constant cell voltage, the electroosmotic flow through thicker membranes (e.g. Nation 117) is reduced because of the reduced electric field strength. The pressure difference required to stop electroosmotic flow is very large due to the extremely small pore diameters. In the presence of sulphuric acid, numerical results have revealed that the electroosmotic flow increases with the acid concentration. (C) 2004 Elsevier B.V. All rights reserved.
