Understanding the effect of Al/Ti ratio on the tribocorrosion performance of Al/Ti co-doped diamond-like carbon films for marine applications

Understanding the effect of Al/Ti ratio on the tribocorrosion performance of Al/Ti co-doped diamond-like carbon films for marine applications
复制标题

了解 Al/Ti 比例对海洋应用 Al/Ti 共掺杂类金刚石碳膜摩擦腐蚀性能的影响

DOI:
10.1016/j.surfcoat.2020.126347
复制
发表时间:
2020-11
影响因子:
5.4
通讯作者:
Aiying Wang
Aiying Wang
中科院分区:
材料科学1区
文献类型:
--
作者:
Xiaowei Xu;Peng Guo;Xiao Zuo;Lili Sun;Xiaowei Li;Kwang-Ryeol Lee;Aiying Wang

文献摘要

参考文献

被引文献

相似文献

Al and Ti co-doped diamond-like carbon (DLC) films (Al/Ti-DLC) were prepared through hybrid ion beam deposition technique, in which the Al/Ti ratio was tailored from 6.6 to 2.0. The dependence of tribocorrosion performance of Al/Ti-DLC film on the Al/Ti ratio in 3.5 wt% NaCl solution was systematically explored. Results indicated that the existing states of Al and Ti dopants in the film were independent on the Al/Ti ratio, where Al existed in the form of oxidized state, while Ti mainly bonded with C and thus formed the titanium carbide following the presence of titanium oxide, leading to the increase of hardness and elastic modulus with the decrease of Al/Ti ratio. In particular, with reducing the Al/Ti ratio from 6.6 to 2.0, the tribocorrosion resistance was improved, mainly originating from the reduction of pure mechanical wear. However, EIS analysis further revealed that although the mechanical wear accelerated the electrochemical corrosion of Al/Ti-DLC films, the contribution of the synergistic effect between mechanical wear and corrosion attack to materials loss increased following the drop of Al/Ti ratio, due to the corrosion-induced wear rather than wear-induced corrosion. These outcomes not only shed light on the effect of Al/Ti ratio in the film on the tribocorrosion property but also guide the design of DLC films for marine applications.
DOI: 10.1016/j.tsf.2012.04.016
发表时间: 2012-07
期刊: Thin Solid Films
影响因子: 2.1
作者:
Wei Dai;Peiling Ke;Myoung-Woon Moon;Kwang-Ryeol Lee;Aiying Wang
通讯作者: Aiying Wang
DOI: 10.1016/j.surfcoat.2019.01.049
发表时间: 2019-03
影响因子: 5.4
作者:
Yong Zhou;Peng Guo;Lili Sun;Linlin Liu;Xiaowei Xu;Wen-xian Li;Xiaowei Li;Kwang-Ryeol Lee;Aiying Wang
通讯作者: Yong Zhou;Peng Guo;Lili Sun;Linlin Liu;Xiaowei Xu;Wen-xian Li;Xiaowei Li;Kwang-Ryeol Lee;Aiying Wang
DOI: 10.1016/j.wear.2017.01.076
发表时间: 2017-04
期刊: Wear
影响因子: 5
作者:
R. Wood
通讯作者: R. Wood
DOI: 10.1016/j.tsf.2004.07.077
发表时间: 2005-02
期刊: Thin Solid Films
影响因子: 2.1
作者:
W. Yang;T. Sekino;K. Shim;K. Niihara;K. Auh
通讯作者: W. Yang;T. Sekino;K. Shim;K. Niihara;K. Auh
DOI: 10.1016/s0925-9635(03)00018-9
发表时间: 2003-02-01
影响因子: 4.1
作者:
Grill, A
通讯作者: Grill, A