Wireless Sensor Network for A Bite Force Recorder
Wireless Sensor Network for A Bite Force Recorder
复制标题
用于咬合力记录仪的无线传感器网络
DOI：
--
复制
发表时间：
2020
期刊：
影响因子：
--
通讯作者：
H. A. Ghani
中科院分区：
文献类型：
--
作者：
J. Roffie;T. W. Lim;M. Patar;S. Abdullah;H. A. Ghani
一个人的最大咬合力是最重要的周长之一，它关系到一个人的口腔健康状况。咬合力的测量可以为评估颌骨肌肉的功能和活动提供有用的数据。它也是评估牙体性能的辅助价值。市场上有许多咬合力记录仪，然而，这些设备在准确性、可重复性、高成本和口腔内应用感染控制方面存在许多缺点，这进一步限制了其使用和有效性。这项创新的目的是开发一种无线、方便、经济、可靠的咬合力记录设备，该设备可以在办公室使用3d打印机生产。Arduino Nano微控制器连接到蓝牙模块，用于与智能手机的无线连接。采用计算机辅助设计软件对咬痕计进行了专门设计，并使用3d打印机进行了生产。采用连接在咬合力计上的柔性力传感器系统测量咬合力。通过实验室标定验证了咬合力记录仪的一致性和准确性，结果显示咬合力读数具有良好的线性和重复性。对人类受试者进行了初步研究，以了解成年人正常咬合力的范围。本研究的实证结果表明，该装置在牙科应用中具有合理的可行性。[J]国际医学杂志，2020;13(4):1592-1597。
Maximum bite force of an individual is one of the most important perimeters which correlate with the wellbeing of the oral health of a person. The measurement of bite force can provide a useful data for the evaluation of jaw muscle functions and activities. It is also an adjunctive value in assessing the performance of a dental prosthesis. There are many bite force recorders in the market, however, the devices have many drawbacks in terms of accuracy, reproducibility, high costs, and infection control for intraoral application, which further limit its usage and effectiveness. The purpose of this innovation is to develop a wireless, handy, cost effective and reliable bite force recorder device in which can be produced in-office using a 3-D printer. Arduino Nano microcontroller connected to a Bluetooth module was used for a wireless connection to a smartphone. The bite gauge was specially design using computer aided design software and produced using 3-D printer. Flexi forceTM sensor system that was attached to the bite gauge was used to measure the bite force. The consistency and accuracy of the bite force recorder was reaffirmed by laboratory calibration and the result showed good linearity as well as excellent repeatability of the forces reading. Pilot study on human subjects was conducted to see the range of normal bite strength in adults. The positive demonstration found in this study suggests reasonable feasibility of using this device for dental application. Review (J Int Dent Med Res 2020; 13(4): 1592-1597)
DOI：
--
发表时间：
2011
期刊：
影响因子：
--
作者：
内藤善仁;祇園白信仁;他;武部 純,古川良俊,伊藤茂樹,島崎伸子,八重嶋彩子,千田豪也,石岡道久,伊藤創造,塩山 司,石橋寛二;Matsumura H
通讯作者：
Matsumura H