A discussion about the method to study the effect of ambient pressure on hydraulic jetting
A discussion about the method to study the effect of ambient pressure on hydraulic jetting
复制标题
环境压力对水力喷射影响研究方法探讨
DOI:
10.1016/j.petrol.2016.10.043
复制
发表时间:
2017-01
影响因子:
--
通讯作者:
Zhang Shikun
中科院分区:
文献类型:
--
作者:
Li Jingbin;Li Gensheng;Huang Zhongwei;Song Xianzhi;He Zhenguo;Zhang Shikun
Hydraulic jetting techniques are widely used to improve the rate of penetration (ROP) and enhance oil recovery.(EOR) in the oil and gas field. However, a high ambient pressure could significantly weaken the performance of.hydraulic jetting at the bottom of wells, especially in the case of deep ( > 4500 m) and ultra-deep ( > 6000 m).wells. Hence, many excellent studies have been conducted to study the effect of the ambient pressure on a.hydraulic jetting. A method to generate ambient pressure by changing the diameter of the outlet valve is widely.used. However, in our study, it is proved that the method cannot simulate the real ambient pressure.environment for a hydraulic jetting. In our study, an outlet valve is used to maintain the pressure in the.pressure vessel. Jet pressure and impact pressure with different ambient pressures at different standoff.distances are measured. The jet pressure remains unchangeable until the ambient pressure exceeds a threshold.and then increases linearly with the ambient pressure. The threshold is approximately equal to the product of.the pressure drop of the nozzle and the square of the nozzle discharge coefficient. The hydrostatic pressure is not.evenly distributed in the pressure vessel under the generated ambient pressure. According to Bernoulli's.equation, the process to generate ambient pressure by this method is the conversion process between the.hydrostatic pressure and the dynamic pressure. Given that the ambient pressure is evenly distributed at the.bottom of oil wells, it may not have an influence on the hydraulic jetting. Performing an experiment to measure.the effect of the ambient pressure on hydraulic jetting at the bottom of oil wells is strongly recommended. The.results in our study are helpful for the application of hydraulic jetting in oil and gas industry.
登录
查看更多内容
DOI:
10.2118/107061-ms
发表时间:
2007
期刊:
--
影响因子:
--
作者:
A. Nakhwa;S. W. Loving;A. Ferguson;Subhash N. Shah
通讯作者:
A. Nakhwa;S. W. Loving;A. Ferguson;Subhash N. Shah
DOI:
10.2118/694-pa
发表时间:
1964-03
期刊:
Journal of Petroleum Technology
影响因子:
--
作者:
R. Feenstra;J. Leeuwen
通讯作者:
R. Feenstra;J. Leeuwen
DOI:
10.2118/1094-g
发表时间:
1959-12
期刊:
Transactions of the AIME
影响因子:
--
作者:
R. Cunningham;J. G. Eenink
通讯作者:
R. Cunningham;J. G. Eenink
DOI:
10.2118/1260-pa
发表时间:
1965-12
期刊:
Journal of Petroleum Technology
影响因子:
--
作者:
W. Maurer
通讯作者:
W. Maurer
DOI:
10.2118/114673-ms
发表时间:
2008
期刊:
--
影响因子:
--
作者:
M. Wells;Tim Marvel;Chad J. Beuershausen
通讯作者:
M. Wells;Tim Marvel;Chad J. Beuershausen