Strain-Induced Electrical Properties of Lead Zirconate Titanate Thin Films on a Si wafer with Controlled Oxide Electrode Structure

Strain-Induced Electrical Properties of Lead Zirconate Titanate Thin Films on a Si wafer with Controlled Oxide Electrode Structure
复制标题

具有受控氧化物电极结构的硅片上锆钛酸铅薄膜的应变诱导电性能

DOI:
10.1143/jjap.51.09la13
复制
发表时间:
2012
期刊:
Jpn. J. Appl. Phys
影响因子:
--
通讯作者:
Naoki Wakiyaand Hisao Suzuki
Naoki Wakiyaand Hisao Suzuki
中科院分区:
--
文献类型:
--
作者:
Tomoya Ohno;Masaaki Ishiduka;Takashi Arai;Hiroaki. Yanagida;Takeshi. Matsuda;Naonori Sakamoto;Naoki Wakiyaand Hisao Suzuki

文献摘要

相似文献

本文研究了具有较大残余压应力的铁电薄膜的电学性质。在这项研究中,大的压缩应变施加到锆钛酸铅(PZT)薄膜的硅晶片上的底部电极结构的设计。从热膨胀系数的角度来看,选择用于底部电极的材料是氧化镧镍(LNO)和氧化镧锶钴[LSCO;(La 0.5 Sr 0.5)CoO 3]。其结果是,PZT薄膜与准同型相界(MPB)的组成收到压缩残余应力高达约0.8 GPa的底部电极,即使在Si晶片上。残余压应力随着LSCO层厚度的增加而增加。此外,PZT薄膜的反射极化随着残余压应力的增加而增加。
This paper shows the electrical properties of ferroelectric thin films with large compressive residual stress. In this study, the large compressive strain was applied to lead zirconate titanate (PZT) thin films by designing the bottom electrode structure on a Si wafer. The materials selected for the bottom electrode were lanthanum nickel oxide (LNO) and lanthanum strontium cobalt oxide [LSCO;(La 0.5 Sr 0.5) CoO 3] from the viewpoint of thermal expansion coefficients. As a result, the PZT thin films with morphotropic phase boundary (MPB) composition received compressive residual stress up to approximately 0.8 GPa from the bottom electrode even on a Si wafer. The compressive residual stress concomitantly increased with increasing LSCO layer thickness. In addition, the remanent polarization of the PZT thin films increased with increasing compressive residual stress.