A simple technique to achieve active cavity-length stabilisation in a synchronously pumped optical parametric oscillator
A simple technique to achieve active cavity-length stabilisation in a synchronously pumped optical parametric oscillator
复制标题
一种在同步泵浦光参量振荡器中实现主动腔长稳定的简单技术
DOI：
10.1016/0030-4018(95)00533-1
复制
发表时间：
1996
影响因子：
2.4
通讯作者：
D. Hanna
中科院分区：
文献类型：
--
作者：
D. S. Butterworth;S. Girard;D. Hanna
在同步泵浦光参量振荡器中，振荡波长与腔长的关系为腔长和波长的稳定化方案提供了依据。通过使用位置敏感探测器的一个简单的实施方案的设计和性能的三硼酸锂光学参量振荡器的报告。该稳定方案已被证明在振荡器的整个调谐范围（0.65-2.65 μm）内有效，对高达200 Hz的波动具有稳定性，大幅提高了幅度稳定性，并允许在1.5 nm的信号范围内进行平滑的波长调谐。
The dependence of oscillation wavelength on cavity length in a synchronously pumped optical parametric oscillator provides the basis of a scheme for stabilisation of the cavity length and wavelength. The design and performance of a simple implementation of this scheme via the use of a position-sensitive detector is reported for a lithium triborate optical parametric oscillator. The stabilisation scheme has proved effective over the entire tuning range of the oscillator (0.65–2.65 μm), giving stability against fluctuations up to 200 Hz, with greatly improved amplitude stability, and allowing smooth wavelength tuning over a signal range of ∼ 5 nm.