A method for calibrating three-dimensional positron emission tomography without scatter correction
A method for calibrating three-dimensional positron emission tomography without scatter correction
复制标题
一种无需散射校正的三维正电子发射断层扫描校准方法
DOI:
--
复制
发表时间:
1997
期刊:
影响因子:
--
通讯作者:
T. Jones
中科院分区:
文献类型:
--
作者:
D. Bailey;T. Jones
Calibration for three-dimensional positron emission tomography (3D PET) using a uniform cylinder and cross-calibration with aliquots requires correction for scatter and attenuation. Thus the accuracy of thecalibration is dependent on the scatter correction method, and on the applicability of the scatter correction for different regions of the body. A method has been developed which provides a calibration which does not require correction for scatter or attenuation, making it generally applicable and independent of the scatter correction. The method has been previously described for measurement of the absolute sensitivity of tomography devices. This approach has been extended to give a calibration of the PET camera “in air” in units of kBq/pixel. The reconstructed images are multiplied by this factor to, give accurate activity concentrations, after attenuation and scatter correction. The method has been used with a fully 3D filtered back-projection (reprojection) algorithm and iterative convolution-subtraction scatter correction on data from an ECAT 953B. Using this method 3D PET images have been calibrated te, within ±5% accuracy, but this is highly dependent on the accuracy of the scatter correction. The method described here is practical and provides a means of calibrating a 3D PET system without the need for correction for scatter or attenuation of the calibration data.
DOI:
--
发表时间:
1993
期刊:
Journal of nuclear medicine : official publication, Society of Nuclear Medicine
影响因子:
--
作者:
Cherry,SR;Meikle,SR;Hoffman,EJ
通讯作者:
Hoffman,EJ