Construction of a ratiometric electrochemical aptasensor based on graphdiyne-methylene blue and Fc-labeled hairpin for cyclic signal amplification detection of kanamycin
Construction of a ratiometric electrochemical aptasensor based on graphdiyne-methylene blue and Fc-labeled hairpin for cyclic signal amplification detection of kanamycin
复制标题
DOI：
10.1016/j.snb.2022.132706
复制
发表时间：
2022-12
期刊：
影响因子：
--
通讯作者：
Xiaolin Gao;Zhicong Sun;Xiaoyang Wang;Wanqi Zhang;Yue Wang;Jie Han;Xia Sun;Yemin Guo;Falan Li;Shicai Xu
中科院分区：
文献类型：
--
作者：
Xiaolin Gao;Zhicong Sun;Xiaoyang Wang;Wanqi Zhang;Yue Wang;Jie Han;Xia Sun;Yemin Guo;Falan Li;Shicai Xu
Based on ferrocene (Fc)-labeled primers and graphdiyne-methylene blue (GDY-MB) nanocomposite, a ratiometric electrochemical aptasensor was prepared for high-precision detection of kanamycin (KAN). The Fc-labeled primer hybridized with the aptamer forms a rigid structure. When KAN was specifically bound to an aptamer, a primer with a self-complementary sequence was released to form a hairpin structure (HP), drawing the Fc close to the electrode surface, resulting in enhanced IFc. Exonuclease I (Exo I) was used to cleave the single-stranded aptamer and release the target, effectively increasing the cyclic amplification signal. The phosphorylation was carried out at the 3′ end of the primers to prevent HP cleavage. The chitosan - antimony tin oxide (CS-ATO) and AuNPs were used to further modified the electrodes to double the signal amplification. Under the optimal experimental conditions, the KAN concentration exhibited a strong linear relationship with IFc/IMB.The R2(0.997) of the calibration curve was greater than the R2(0.960) of the standard curve of KAN concentration and IFc, which indicates the robustness of the ratiometric electrochemical sensor. The limit of detection (LOD) was 6.044 nM. The aptasensor exhibits strong stability and specificity for successfully detection of KAN in real milk samples.
