Properties of 316L/PSZ composites fabricated by means of extrusion forming and gas-pressure sintering
Properties of 316L/PSZ composites fabricated by means of extrusion forming and gas-pressure sintering
复制标题
挤压成型气压烧结316L/PSZ复合材料的性能
DOI：
10.1016/j.msea.2004.05.002
复制
发表时间：
2004-09
期刊：
影响因子：
--
通讯作者：
Congzeng Wang
中科院分区：
文献类型：
--
作者：
Wenquan Zhang;Jianxin Xie;Congzeng Wang
To fabricate metal–ceramic multilayer hollow functionally gradient materials (FGMs) that might meet the requirement of repeated service and long working time of high temperature burners, such as spacecraft engine, the microstructure and properties of composites of stainless steel and partially stabilized zirconia were investigated. Samples of different proportions of stainless steel (316L) to partially yttria-stabilized zirconia (PSZ) were fabricated by powder extrusion and sintering method. Shrinkage, relative density, microstructure, micro-Vickers hardness, compression strength, bending strength, fractographic morphology, Young’s modulus, coefficient of thermal expansion, thermal diffusivity and thermal conductivity and electric-resistivity of gas-pressure sintered samples with different proportions of stainless steel were measured. The results shows that threshold of ceramic matrix composites (CMCs) and metal matrix composites (MMCs) are approximately equal to 50vol.% 316L and 60vol.% 316L, respectively, and there is some difference between mechanical properties and physical properties in transient point.
登录
查看更多内容
影响因子：
9.1
作者：
Guo, MLT;Tsao, CYA
通讯作者：
Tsao, CYA
影响因子：
5.2
作者：
Kawasaki, A;Watanabe, R
通讯作者：
Watanabe, R
DOI：
10.1016/s0921-5093(99)00498-0
发表时间：
2000-01
影响因子：
6.4
作者：
R. Saravanan;M. Surappa
通讯作者：
R. Saravanan;M. Surappa
影响因子：
4.5
作者：
Zhongchun Chen;K. Ikeda;T. Murakami;T. Takeda
通讯作者：
Zhongchun Chen;K. Ikeda;T. Murakami;T. Takeda
影响因子：
9.4
作者：
Liu, DM;Tuan, WH
通讯作者：
Tuan, WH