The empirical relationship between abrasive wear and the applied conditions
The empirical relationship between abrasive wear and the applied conditions
复制标题
DOI：
10.1016/0043-1648(66)90004-4
复制
发表时间：
1966-07
期刊：
影响因子：
5
通讯作者：
G. Nathan;W. Jones
中科院分区：
文献类型：
--
作者：
G. Nathan;W. Jones
研究了不同金属的磨损量随磨粒平均直径（35-710 μ）、负载（0.5-6 kg）、磨损速度（0.032-2.50 m/sec）和磨损路径长度（1.5-6 m）的变化的变化。该研究是在正常实验室环境条件下进行的。根据实验结果，得出了将磨损量与不同参数相关的经验公式。已经尝试从各个方面解释磨损量与不同参数之间的关系。
An investigation has been carried out to study the variation of the volume of wear of different metals with variation of the mean diameter of abrasive particles (35–710 μ), the load (0.5–6 kg), the velocity of abrasion (0.032–2.50 m/sec) and the length of abrasion path (1.5–6 m).The investigation was conducted under normal laboratory conditions of the environment. From the results of the experiments an empirical formula relating volume of wear to different parameters was derived. An attempt has been made to explain the various aspects of the relationship of volume of wear with the different parameters.