Creep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature
Creep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature
复制标题
DOI：
10.1016/j.compositesa.2016.04.017
复制
发表时间：
2016-07
影响因子：
8.7
通讯作者：
J. Renaud;N. Vernet;É. Ruiz;L. L. Lebel-L.
中科院分区：
文献类型：
--
作者：
J. Renaud;N. Vernet;É. Ruiz;L. L. Lebel-L.
本研究旨在了解和改进三维碳联锁织物在水润滑、高温及两者结合下的压实性。在不同的润滑和温度条件下，在机械试验机上对蠕变压实行为进行了研究。研究了三种不同的互锁织物在高温下的蠕变压实性能，以评估织造方式对其蠕变压实性能的影响。最后，进行了试验研究，指出纤维施胶对蠕变压实行为的影响及其随温度的变化规律。研究结果表明，温度和润滑对三维互锁织物的压实能力有很大影响，并与纤维上浆有关。
This study aims at understanding and improving the compaction of 3D carbon interlock fabrics with water lubrication, high temperature and a combination of them. The creep compaction behavior was characterized in a mechanical testing machine under different lubrication and temperature conditions. Three different interlock fabrics were studied at high temperature in order to assess the influence of the weaving pattern on the creep compaction behavior. Finally, an experimental study was carried out to point the impact of fiber sizing on the creep compaction behavior and its evolution with temperature. The results of this work demonstrate the strong impact of temperature and lubrication on the compaction ability of 3D interlock fabrics and its link to the fiber sizing.