Controllable synthesis of spindle-like ZnO nanostructures by a simple low-temperature aqueous solution route

Controllable synthesis of spindle-like ZnO nanostructures by a simple low-temperature aqueous solution route
复制标题

通过简单的低温水溶液路线可控合成纺锤状ZnO纳米结构

DOI:
10.1016/j.apsusc.2010.12.115
复制
发表时间:
2011-02
影响因子:
6.7
通讯作者:
Yu, Xiu-jun
Yu, Xiu-jun
中科院分区:
材料科学1区
文献类型:
--
作者:
Zhang, Rui;Zhang, Li-wei;Xu, Hong-liang;De Liang Chen;Lu, Hong-xia;Wang, Hai-long;Yang, Dao-yuan;Zhao, Yun-long;Yu, Xiu-jun

文献摘要

参考文献

被引文献

相似文献

通过在60℃下直接沉淀醋酸锌水溶液,成功合成了纺锤状ZnO纳米结构。通过X射线衍射、TG-DTA、FTIR和场发射扫描电子显微镜(FESEM)研究了产物的相结构、形貌和微观结构。结果表明,得到了直径约100nm、长度100-200nm的六方纤锌矿结构ZnO纳米结构。 HMTA在此过程中充当软模板,在纺锤状ZnO纳米结构的形成中发挥了重要作用。同时,通过改变合成温度、添加剂和Zn2+/OH-的比例也获得了不同的形貌。本文还讨论了形貌随合成参数变化的可能机制。
Spindle-like ZnO nanostructures were successfully synthesized through direct precipitation of zinc acetate aqueous solution at 60°C. Phase structure, morphology and microstructure of the products were investigated by X-ray diffraction, TG-DTA, FTIR and field emission scanning electron microscopy (FESEM). Result showed that hexagonal wurtzite structure ZnO nanostructures with about 100nm in diameter and 100–200nm in length were obtained. HMTA acted as a soft template in the process and played an important role in the formation of spindle-like ZnO nanostructures. Meanwhile, different morphologies were also obtained by altering synthetic temperature, additional agents and the ratios of Zn2+/OH−. Possible mechanism for the variations of morphology with synthesis parameters was also discussed in this paper.
DOI: 10.1016/j.apsusc.2006.01.028
发表时间: 2006-11
影响因子: 6.7
作者:
Zhu, Liping;Xia, Xianhui;Zhao, Binghui;Yuan, Guodong;Ye, Zhizhen
通讯作者: Ye, Zhizhen
DOI: 10.1016/j.msea.2004.09.067
发表时间: 2005-02
影响因子: 6.4
作者:
Huiying Wei;Y. Wu;N. Lun;Chunxia Hu
通讯作者: Huiying Wei;Y. Wu;N. Lun;Chunxia Hu
DOI: 10.1002/adfm.200400080
发表时间: 2005-02
影响因子: 19
作者:
Weiwei Zheng;Fan Guo;Y. Qian
通讯作者: Weiwei Zheng;Fan Guo;Y. Qian
微乳液中ZnO纳米结构的合成与形貌控制
DOI: 10.1016/j.jcis.2009.02.029
发表时间: 2009-05-15
影响因子: 9.9
作者:
Li, Xiangcun;He, Gaohong;Wang, Mei
通讯作者: Wang, Mei
DOI: 10.1002/adma.200390108
发表时间: 2003-03-04
期刊: ADVANCED MATERIALS
影响因子: 29.4
作者:
Vayssieres, L
通讯作者: Vayssieres, L