Extension of the process limits by integration of oscillation tool into an industry-oriented sheet-bulk metal forming process (T05)

该项目的目的是实现和研究从子项目A7中获得的关于叠加振荡的结果转移到面向工业的薄板大块金属成形过程的边界条件。目标是通过在钣金成形过程中强大的振荡叠加实现优化的材料流，提高组件质量和缩短工艺时间。同时，研究了TP A7在600 Hz频率和60 μm振幅下的新振荡过程对抽象过程的影响。根据所获得的结果，提出了一种向其他SBMF过程转移的方法。

The aim of the project is to realise and investigate the transfer of the obtained results from the subproject A7 regarding the superimposed oscillation to the boundary conditions of an industry-oriented sheet bulk-metal forming process. The objective is to achieve an optimised material flow, increased component quality and low process times through a powerful oscillation superposition in a sheet metal forming process. At the same time, the influence of the new oscillating process from the TP A7 at frequencies of up to 600 Hz and amplitude of up to 60 μm is to be examined for the abstracted process. From the results obtained, a transfer approach to other SBMF processes is developed.