A Study of Developing a Stomatognathic Function Database for Diagnosis

虽然已经开发了多种类型的颌运动分析系统，但是由于基准面或参考点的差异，来自不同系统的分析结果不能直接比较。这种可重复性的侥幸心理，使口腔颌面功能评价的研究成果难以积累，难以为口腔颌面功能评价提供依据。本研究的目的是建立一个新的口颌功能数据库，建立评价口颌功能的参考值。在本研究中，我们调查了数据库中注册的受试者信息、颌骨运动数据的标准文件格式以及与测量系统无关的、可在不同系统间进行比较的分析参数。采用ASCII序列格式，以三维坐标（X，Y，Z）表示颌骨运动轨迹数据，输出结果可从大多数测量数据中导出， ...更多信息 无需对分析软件进行任何修改即可使用系统。在将这些数据注册到数据库之前，我们使用定制软件进行处理，该软件用于将收集的数据转换为标准化格式的下颌运动数据。这种标准的颌骨运动数据格式使得开发能够处理来自不同系统的颌骨运动数据的分析软件变得容易。在此基础上，在Microsoft ACCESS2000上开发了数据库管理系统。同时，对分析参数也进行了研究。为了积累研究成果，建立独立于分析系统的参数和参考值是绝对必要的。使用这些类型的参数，从不同系统的测量数据可以在一个统一的方式进行评估，并在数据库中使用，以建立颌功能的参考值。这些参考值可以作为证据的基础知识。本研究的结果在国内和国际会议上发表，并发表在许多科学期刊上。

Although many types of jaw movement analyzing systems have been developed, analyzed results from different systems cannot be compared directly because of differences of base planes or reference points. This kind of luck of interchangeability makes it difficult to accumulate research results and to create the evidence for evaluating stomatognathic function. The purpose of this research was to develop a new stomatognathic function database and establish reference values for evaluating stomatognathic functionsIn this research, we investigated about information of subjects to register on the database, the standard file format of j aw movements data and analyzing parameters that were independent of measuring systems and could be intercompared among different systemsTo collect jaw movement data from different systems, we adopted an ASCII sequential format, locus data of jaw movements expressed with three dimensional coordinates (X, Y, Z), those output were could be exported from most of meas … More uring systems without any modification of analyzing software. Before registering those data on the database, we processed them with custom software that was developed to convert collected data into standardized formatted jaw movement data. This standard format of jaw movement data made it easy to develop analyzing software that could process jaw movement data from different systems. Then we developed the DBMS (Database Management System) on Microsoft ACCESS2000. At the same time, we also investigated analyzing parameters. It is absolutely essential to establish parameters and reference values that are independent of analyzing systems in order to accumulate research findings. Using these kinds of parameters, measured data from different systems can be evaluated in a uniform manner and used in database to establish reference values of jaw function. Those reference values could be a basic knowledge of the evidenceResults of this research were presented in domestic and international meetings and published in many scientific journals Less