Induction Sector Cyclotron

2006年，感应同步加速器的概念在KEK上得到了演示。用感应加速法代替了射频加速。一台采用类似方法的高贵回旋加速器已经被提出。详细研究了扇形回旋加速器中团簇离子的动力学，特别是得到了保证轨道稳定性的参数区域。此外，在热分析和电路分析的基础上，设计了关键器件之一的赛道形感应电池样机。它已经准备好组装了。用于下一代开关电源的Noble开关元件封装正在开发中。驱动感应扇形回旋加速器感应单元的开关电源属于下一代。因此，在此基础上，以SIC-JFET开关元件封装为基础，设计了感应加速系统。

In2006, the concept of induction synchrotron had been demonstrated at KEK. Instead of RF acceleration, the induction acceleration method was employed there. A noble cyclotron employing the similar method had been already proposed. Details of cluster ion dynamics in a sector cyclotron have been investigated ; especially a parameter region promising the orbit stability has been obtained. In addition, a prototype race-track shape induction cell, which is one of key devices, was designed based on thermal analysis and circuit analysis. It is ready to be assembled. A noble switching element package for the next generation of switching power supply is under development. The switching power supply driving the induction cell for the induction sector cyclotron belongs to the next generation. So, the induction acceleration system has been designed based on this next generation assuming the SiC-JFET switching element package.