TS247-6-axis automated ultrasonic inspection of failure critical peeled bar steel billets

24 Seven和Peak NDT正在进行一个合作项目，以开发一种新的方法来完成第一阶段金属坯料的全面检查，从而消除了对预检查加工阶段的要求。该项目将基于Stoke-On-Trent的工程公司的编程和运动控制专业知识与基于Derby的Peak屡获殊荣的相控阵能力相结合。由于设备安装不足的严重影响，金属钢坯缺陷的检测对能源和快速增长的航空航天供应部门的供应业务至关重要。一个成功的项目将确保在尽可能早的阶段发现缺陷，从而为这些行业的生产商消除相当大的成本。通过减少原材料生产中的浪费和能源使用，这也对供应公司、航空航天制造商和环境产生了积极影响。

Technical Solutions 24 Seven and Peak NDT are undertaking a collaborative project to develop a novel method for the complete inspection of stage one metallic billets, eliminating the requirement for the pre-inspection machining phase. This project joins the programming and motion control expertise of the Stoke-On-Trent based engineering firm with the award winning Phased Array capabilities of Derby based Peak. The detection of flaws in metallic billets is of crucial importance to supply businesses within the energy and rapidly gowing aerospace supply sector as a result of the critical impact of the installation of inadequate equipment. A successful project will enable the elimination of a considerable cost for producers to these industries by ensuring flaws are detected at the earliest possible stage. This also has positive impacts for supply firms, aerospace manufacturers and the environment - through reduced wastage and energy use in raw material production.