Assessment of natural bioattenuation of PCE & TCE

该项目将联合收割机基因探针分析与实验室和实地研究相结合，以评估一种创新的含水层补救技术-共溶剂冲洗（使用95%乙醇）-对土著微生物的影响。除了研究生态系统功能的指标外，本项目还将调查在最初受到四氯乙烯（PCE）和三氯乙烯（TCE）污染的特定地点存在的微生物种群降解处理后残留的残留污染物和降解产物的潜力。待检验的具体假设是：1）现场存在的微生物能够恢复到冲洗前识别的原始多样性和活性; 2）这些反弹的微生物能够降解冲洗后残留的任何污染物和子产物，从而使现场对人类健康和环境无害。这项拟议的工作有三个具体目标：特异性目的1/基因探针分析：将在治疗前后测量特定的原核基因浓度，并将其用作生态和生物降解指标。这些指标将与实验室（特定处理）相关，并将用作生态和生物降解指标。然后将这些指标与实验室（具体目标2）和现场微观世界（具体目标3）的结果联系起来，以便提供一种评估现有群落自然降解能力的手段。具体目标2/实验室微宇宙研究：将建立微宇宙，模拟佛罗里达州杰克逊维尔PCE和TCE污染场地乙醇冲洗前后的环境（根据氧气水平、营养物和污染物浓度）。污染物转化率和产物形成率（包括TCE、顺式和反式二氯乙烯（DCE）、氯乙烯（VC）、乙烯（ETH）、水合氯醛二氯乙酸酯等）将在治疗前后进行测量和比较。具体目标3/原位微宇宙研究：将建立原位微宇宙，然后将其放置在PCE污染场地的不同位置。将测量底物转化、产物形成和电子供体/受体利用的原位速率，并与实验室微观研究进行比较，作为确定现场冲洗前后微生物活性的另一种评估工具。

This project will combine gene probe analysis with laboratory and field studies to assess the effect of an innovative aquifer remediation technology, co-solvent flushing (using 95% ethanol), on the indigenous microorganisms. In addition to studying indicators of ecosystems functioning, this project will also investigate the potential of the microbial populations present at a specific site originally contaminated with perchloroethylene (PCE) and trichloroethylene (TCE) to degrade residual contaminant and degradation products remaining after treatment. The specific hypotheses to be tested are: 1) microorganisms present at the site are capable of rebounding to their original diversity and activity recognized before flushing; and 2) these rebounded microorganisms are capable of degrading any contaminant and daughter products remaining after flushing, thus rendering the site harmless to human health and the environment. This proposed work has three specific aims: SPECIFIC AIM 1/GENE PROBE ANALYSIS: Specific prokaryotic gene concentrations will be measured before and after treatment and will be used as ecological and biodegradative indicators. These indicators will then be related to laboratory (Specific treatment and will be used as ecological and biodegradative indicators. These indicators will then be related to laboratory (Specific Aim 2) and in situ microcosm (Specific Aim 3) results in order to provide a means of assessing the natural degradative ability of the communities present. SPECIFIC AIM 2/LABORATORY MICROCOSM STUDIES: Microcosms will be set up to model the environment present before and after ethanol-flushing at a PCE- and TCE-contaminated site in Jacksonville, FL (in terms of oxygen levels, nutrient and contaminant concentrations). Rates of contaminant transformation and product formation (including TCE, cis- and trans-dichloroethylene (DCE), vinyl chloride (VC), ethene (ETH), chloral hydrate dichloroacetate, etc.) will be measured and compared before and after treatment. SPECIFIC AIM 3/IN SITU MICROCOSM STUDIES: In situ microcosms will be built and then placed at various locations at a PCE- contaminated site. In situ rates of substrate transformation, product formation, and electron donor/acceptor utilization will be measured and compared to the laboratory microcosm studies as another assessment tool for determining the activity of the microorganisms present before and after flushing at the site.