New disposal techniques for reactive mine wastes to improve stability and facilitate site reclamation upon closure

对安全管理大量活性矿山废物提出的复杂挑战要求采取创新办法来解决各种地质环境问题，并确保处置场地的岩土工程和水文地球化学稳定性。最近的工作表明，尾矿库中沿着选定路径放置的废石夹杂物(WRI)可以通过加速排水和固结并提供加固来提高其稳定性和性能。这项创新技术最初由申请者(和合作者)提出，已在加拿大马拉蒂克金矿(加拿大昆士兰州西部)大规模高效应用了7年多。这项技术的成功现场应用也提出了其他尚未解决(或甚至考虑)的问题，包括WRI对邻近尾矿的饱和度的影响，它们对氧气进入和硫化物矿物产生的酸性矿山废水(AMD)的影响，以及这些问题可能如何影响场地关闭后的复垦工作。这些问题将通过拟议的探索奖助金计划(项目A)进行调查。在暴露于自然条件下的堆放的活性废石是采矿作业的另一个关键问题，因为这些可能成为受污染水的主要来源。初步的实验室和现场工作表明，通过在桩顶和桩内增加流动控制层(FCL)来限制表面入渗，可以控制桩中受污染渗水的产生。在桩施工过程中，这些层被放置在每个台阶(和升降台)的表面，以限制向桩的反应核心的渗透和深层渗透。物理模型、数值模拟和新近在东秦岭Tio矿建造的大型试验废石堆的实验室试验表明，该技术具有很大的潜力。但研究还揭示了需要更密切关注的其他关键方面，包括三维效应、整流罩下方粗粒废石中的局部水流，以及如何确定最佳条件，以最大限度地提高整流罩的材料特性、层厚、倾斜度和在桩中的垂直位置。这些方面也将通过拟议的探索基金研究计划(B项目)进行调查。

The complex challenges raised for the safe management of large quantities of reactive mine wastes require innovative approaches to address various geo-environmental concerns and ensure the geotechnical and hydrogeochemical stability of the disposal sites. Recent work has shown that waste rock inclusions (WRI) placed along selected paths within tailings impoundment can be used to improve their stability and performance by accelerating drainage and consolidation and providing reinforcement. This innovative technique, initially proposed by the Applicant (and collaborators), has been applied efficiently on a large scale at the Canadian Malartic gold mine site (western QC, Canada) for over 7 years. The successful field application of this technique has also raised additional questions that have not yet been addressed (or even considered), including the effect of WRI on the degree of saturation of adjacent tailings, their influence on oxygen ingress and generation of acid mine drainage (AMD) from sulphide minerals, and  how these may impact the reclamation work upon site closure. These issues will be investigated through the proposed Discovery Grant program (Project A). The disposal of reactive waste rock in piles exposed to natural conditions is another critical issue for mining operations, as these may become a major source of contaminated waters. Preliminary laboratory and field work has shown that it is possible to control the generation of contaminated seepage waters in piles by limiting surface infiltration with the addition of flow control layers (FCL) on the top and inside the pile. These layers are placed during pile construction on the surface of each bench (and lift) to limit infiltration and deep percolation toward the reactive core of the pile. Laboratory tests on physical models, numerical simulations and a recently built large scale experimental waste rock pile at the Tio mine (RTFT, Eastern QC) have shown that this technique has a great potential. But the studies also revealed other key aspects that need to be looked at more closely, including three-dimensional effects, localized water flow in the coarse-grained waste rock below the FCL, and ways to define optimum conditions to maximize the efficiency of FCL in terms of material properties and layer thickness, inclination, and vertical position in the pile. These aspects will also be investigated  through the proposed Discovery Grant research program (Project B).