Evolution of dislocation cellular pattern in Inconel 718 alloy fabricated by laser powder-bed fusion
Evolution of dislocation cellular pattern in Inconel 718 alloy fabricated by laser powder-bed fusion
复制标题
激光粉末床熔合 Inconel 718 合金中位错蜂窝图案的演变
DOI：
10.1016/j.addma.2022.102839
复制
发表时间：
2022-04
影响因子：
11
通讯作者：
Shuai Wang
中科院分区：
文献类型：
--
作者：
Minglin He;Hailin Cao;Qian Liu;Jiang Yi;Yong Ni;Shuai Wang
The dislocation cellular pattern (DCP) is a predominant microstructure in laser-based additively manufactured metals. Understanding the evolution of DCP paves the way for optimizing the laser-produced microstructure, which can ultimately modify the mechanical properties. In this work, we combined tensile test and multiscale characterization methods to systematically study the development of DCP in deformed Inconel 718 alloy that was processed with laser powder-bed fusion technique. Although the DCP has a similar appearance as the deformation-induced dislocation cell, the wall of DCP consists of solute atoms and small precipitates, which are absent in the conventional dislocation cell. The development of DCP during plastic deformation was independent of crystal orientation. The evolution process of DCP can be divided into two stages. At a tensile strain lower than 10%, the size of DCP was independent of flow stress. At higher strain levels, the DCP size decreased; however, the maximum reduction obtained at the strain-to-failure was only ~27% of the undeformed DCP size. The geometrically necessary dislocation density at DCP boundaries increased as increasing strain. Because of the interactions of dislocation tangles, solute atoms, and precipitates in the DCP wall, the DCP configuration is stabilized, and its role in deformation was neither like that of the dislocation cell nor that of the grain boundary.
登录
查看更多内容
DOI：
10.1007/s11661-011-0664-5
发表时间：
2011-09-01
影响因子：
2.8
作者：
Brundidge, C. L.;Miller, J. D.;Pollock, T. M.
通讯作者：
Pollock, T. M.
DOI：
10.1007/s11661-018-4607-2
发表时间：
2018-07-01
影响因子：
2.8
作者：
Shamsujjoha, Md.;Agnew, Sean R.;Newman, Tabitha A.
通讯作者：
Newman, Tabitha A.
DOI：
10.1016/j.msea.2016.07.061
发表时间：
2016-09-30
影响因子：
6.4
作者：
Proebstle, M.;Neumeier, S.;Goeken, M.
通讯作者：
Goeken, M.
影响因子：
11
作者：
Gallmeyer, Thomas G.;Moorthy, Senthamilaruvi;Stebner, Aaron P.
通讯作者：
Stebner, Aaron P.
影响因子：
9.4
作者：
Shuai Wang;A. Nagao;P. Sofronis;I. Robertson
通讯作者：
Shuai Wang;A. Nagao;P. Sofronis;I. Robertson