Preparation of nanoporous Ag@TiO2 ribbons through dealloying and their electrocatalytic properties

Preparation of nanoporous Ag@TiO2 ribbons through dealloying and their electrocatalytic properties
复制标题

脱合金纳米孔Ag@TiO 2 带材的制备及其电催化性能

DOI:
10.1007/s10008-014-2702-x
复制
发表时间:
2015-04
期刊:
J Solid State Electrochem
影响因子:
--
通讯作者:
Wenjie Feng
Wenjie Feng
中科院分区:
其他
文献类型:
--
作者:
Xiaolong Zhang;Xiaoping Song;Zhanbo Sun;Wenjie Feng

文献摘要

参考文献

相似文献

采用NaOH溶液对快淬Al-Ag-Ti薄带进行脱合金处理,成功制备了具有核壳结构的纳米多孔Ag@TiO2复合材料。结果表明,在Ag纳米带表面原位生成了厚度约为2 nm的TiO 2壳层。脱合金样品经873 K焙烧后,Ti 3+和Ag+物种共存,对催化剂性能有显著影响。电化学测试结果表明,纳米多孔Ag@TiO2复合材料对BH 4 −的直接氧化反应的促进作用明显上级纯Ag。增强的催化活性可以归因于韧带和TiO 2壳层之间的强界面效应。
Nanoporous Ag@TiO2 composites with core-shell structure were successfully prepared through dealloying the melt-spun Al-Ag-Ti ribbons in NaOH aqueous solution. The results revealed that TiO2 shell with thickness of about 2 nm was formed in situ on the Ag ligaments. Ti3+ and Ag+ species co-existed after the dealloyed samples were calcined at 873 K, which had significant influence on the catalytic performance. The electrochemical results showed that the nanoporous Ag@TiO2 composites significantly promoted the direct oxidation of BH4− superior to pure Ag. The enhanced catalytic activity could be attributed to the strong interfacial effects between the ligaments and TiO2 shells.
DOI: 10.1016/j.corsci.2012.11.027
发表时间: 2013-03-01
期刊: CORROSION SCIENCE
影响因子: 8.3
作者:
Song, T. T.;Gao, Y. L.;Zhai, Q. J.
通讯作者: Zhai, Q. J.
TiO2 修饰的纳米多孔金增强甲醇氧化的光电催化活性
DOI: 10.1021/jp904191k
发表时间: 2009-09-10
影响因子: 3.7
作者:
Jia, Chuancheng;Yin, Huiming;Ding, Yi
通讯作者: Ding, Yi
DOI: 10.1021/jp071815y
发表时间: 2007-06-21
影响因子: 3.7
作者:
Jia, Falong;Yu, Chuanfang;Zhang, Lizhi
通讯作者: Zhang, Lizhi
DOI: 10.1039/b919313h
发表时间: 2010-02
期刊: Physical chemistry chemical physics : PCCP
影响因子: --
作者:
Qian Zhang;Zhonghua Zhang
通讯作者: Qian Zhang;Zhonghua Zhang
DOI: 10.1021/cs300231u
发表时间: 2012-09
期刊: ACS Catalysis
影响因子: 12.9
作者:
Arne Wittstock;A. Wichmann;M. Bäumer
通讯作者: Arne Wittstock;A. Wichmann;M. Bäumer