Amorphous carbon film deposition on the inner surface of tubes using atmospheric pressure pulsed filamentary plasma source

Amorphous carbon film deposition on the inner surface of tubes using atmospheric pressure pulsed filamentary plasma source
复制标题

利用大气压脉冲丝状等离子体源在管内表面沉积非晶碳膜

DOI:
10.1088/0022-3727/44/35/355206
复制
发表时间:
2011
期刊:
Journal of Physics D: Applied Physics
影响因子:
--
通讯作者:
P. Awakowicz
P. Awakowicz
中科院分区:
--
文献类型:
--
作者:
R. Pothiraja;N. Bibinov;P. Awakowicz

文献摘要

参考文献

被引文献

相似文献

在内径为6 mm、外径为8 mm的石英管的内表面上沉积均匀的非晶碳膜。长等离子体细丝(约140 mm)在具有甲烷混合物的氩气中在管内产生。FTIR ATR、XRD、扫描电镜、激光扫描显微镜和XPS分析表明,沉积膜是由未氢化的sp2碳和氢化的sp3碳组成的非晶态。等离子体的特点是使用光学发射光谱,电压-电流测量,显微摄影和数值模拟。在观察到的等离子体参数的基础上,薄膜沉积过程的动力学进行了讨论。
Uniform amorphous carbon film is deposited on the inner surface of quartz tubes having an inner diameter of 6 mm and an outer diameter of 8 mm. A pulsed filamentary plasma source is used for the deposition. Long plasma filaments (∼ 140 mm) are generated inside the tube in argon with methane admixture. FTIR–ATR, XRD, scanning electron microscope, laser scanning microscope and XPS analyses give the conclusion that deposited film is amorphous composed of non-hydrogenated sp 2 carbon and hydrogenated sp 3 carbon. Plasma is characterized using optical emission spectroscopy, voltage–current measurement, microphotography and numerical simulation. On the basis of observed plasma parameters, the kinetics of the film deposition process is discussed.
沉积在不对称聚砜气体分离膜上的 CH4 等离子体聚合物层的 CF4 辉光放电改性
DOI: 10.1021/la951062j
发表时间: 1996
期刊: Langmuir
影响因子: 3.9
作者:
J. Hopkins;J. Badyal
通讯作者: J. Badyal
C2(X1Σg+) 与 H2 和 CH4 反应以及 C2(X1Σg+ 和 3πu 平衡态) 与 O2 反应的温度依赖性
DOI: --
发表时间: 1982
期刊:
影响因子: --
作者:
W. M. Pitts;L. Pasternack;J. R. Mcdonald
通讯作者: J. R. Mcdonald
离子分子反应的速率系数 I. 含 C 和 H 的离子
DOI: --
发表时间: 1976
期刊:
影响因子: --
作者:
L. W. Sieck;S. Lias
通讯作者: S. Lias
DOI: 10.1021/la990039l
发表时间: 1999-09-28
期刊: LANGMUIR
影响因子: 3.9
作者:
Babukutty, Y;Prat, R;Kodama, M
通讯作者: Kodama, M
DOI: 10.3365/met.mat.2008.04.269
发表时间: 2008
影响因子: 3.5
作者:
Hao Zhang;Yanfang Chen;Sung‐Soo Kim;Y. Lim
通讯作者: Y. Lim