Experimental measurement and numerical analysis of fused taper shape for optical fiber coupler
Experimental measurement and numerical analysis of fused taper shape for optical fiber coupler
复制标题
光纤耦合器熔锥形状的实验测量与数值分析
DOI：
10.1007/s11771-007-0050-z
复制
发表时间：
2007-04
期刊：
影响因子：
--
通讯作者：
Zhong Jue
中科院分区：
文献类型：
--
作者：
Shuai Ci-jun;Duan Ji-an;Zhong Jue
为了了解熔锥区形状对光纤耦合器的影响，利用六轴光纤耦合器在不同的拉拔速度下制作了光纤耦合器。用显微镜测量熔锥区形状的结果表明，锥角与光纤耦合器的光学性能密切相关。只有对流变性进行精确控制，才能获得高性能的光纤耦合器。建立了基于广义麦克斯韦粘弹性理论的数值分析模型，并用有限元软件进行了求解。计算结果与实验数据吻合较好。为预测在不同工艺参数条件下制作的光纤耦合器的形状提供了理论依据。
To find out the effect of the shape of fused taper region on the optical fiber coupler, the fiber couplers were fabricated at different drawing speeds with a six-axes fiber coupler machine. The results, which were obtained from the shape of fused taper region measured with microscope, show that there is a close correlation between the cone angle and optical performance of fiber coupler. High-performance fiber coupler cannot be obtained until rheological shape is controlled accurately. The numerical analysis model, which was built based on generalized Maxwell viscoelastic theory, is resolved with ANSYS software. The calculated results accord with the experimental data. It can apply a theoretic basis for forecasting the shape of fiber coupler fabricated under the conditions of different technological parameters.
登录
查看更多内容
影响因子：
3.9
作者：
T. Soules;Robert F. Busbey;S. M. Rekhson;A. Markovsky;M. A. Burke
通讯作者：
T. Soules;Robert F. Busbey;S. M. Rekhson;A. Markovsky;M. A. Burke
影响因子：
3.5
作者：
S. Sakaguchi;S. Todoroki
通讯作者：
S. Sakaguchi;S. Todoroki
DOI：
--
发表时间：
2005
期刊：
Optics and Precision Engineering
影响因子：
--
作者：
Zhong Jue
通讯作者：
Zhong Jue
DOI：
10.1117/12.444545
发表时间：
2001-10
期刊：
--
影响因子：
--
作者：
Yuanhong Yang;Di Wu;Xinliu Jiang
通讯作者：
Yuanhong Yang;Di Wu;Xinliu Jiang
影响因子：
3.5
作者：
G. Scherer
通讯作者：
G. Scherer