Strengthening of low-temperature sintered vitrified bond cBN grinding wheels by pre-oxidation of cBN abrasives
Strengthening of low-temperature sintered vitrified bond cBN grinding wheels by pre-oxidation of cBN abrasives
复制标题
cBN磨料预氧化强化低温烧结陶瓷结合剂cBN砂轮
DOI：
10.1016/j.ceramint.2016.02.070
复制
发表时间：
2016-05
影响因子：
5.2
通讯作者：
Jianfeng Yang
中科院分区：
文献类型：
--
作者：
Jianguang Bai;Wenjia Jing;Bo Wang;Jianfeng Yang
A novel method was developed to fabricate vitrified bond cBN grinding wheels with high strength and grinding efficiency. CBN abrasives pre-oxidized at 900 °C for 60 min with thin B2O3film were used as the starting materials for improving their bonding strength with the vitrified bond. Although the porosity is similar, higher flexural strength of 43 MPa could be obtained for the grinding wheels with pre-oxidized cBN abrasives, which were 1.5 times than that of grinding wheels with non-oxidized cBN abrasives (31 MPa). This was ascribed to the good structural bonding between the thin B2O3film and Na–Al–B–Si–O glass bond matrix.
登录
查看更多内容
影响因子：
3
作者：
N. Yan;Weipeng Miao;Yu-cheng Zhao;Mingyao Liu;Liping Wang;Y. Li;Dongpeng Zhao;Q. Zou;Mingzhi W
通讯作者：
N. Yan;Weipeng Miao;Yu-cheng Zhao;Mingyao Liu;Liping Wang;Y. Li;Dongpeng Zhao;Q. Zou;Mingzhi W
影响因子：
3
作者：
Shuang Wang;W. Guo;Hong-an Ma;X. Jia
通讯作者：
Shuang Wang;W. Guo;Hong-an Ma;X. Jia
DOI：
10.4028/www.scientific.net/kem.257-258.251
发表时间：
2004-01
期刊：
Key Engineering Materials
影响因子：
--
作者：
Takeshi Tanaka;S. Esaki;K. Nishida;T. Nakajima;K. Ueno
通讯作者：
Takeshi Tanaka;S. Esaki;K. Nishida;T. Nakajima;K. Ueno
影响因子：
3.8
作者：
Stoch, L;Sroda, M
通讯作者：
Sroda, M
DOI：
10.1016/j.ijrmhm.2015.04.024
发表时间：
2015-09
影响因子：
3.6
作者：
Lei Cui;X. Hao;Yu Tang;Zhang Zheng;Yuxing Yuan;A. Lu
通讯作者：
Lei Cui;X. Hao;Yu Tang;Zhang Zheng;Yuxing Yuan;A. Lu