Time-resolved in situ tomography for the analysis of evolving metal-foam granulates.

Time-resolved in situ tomography for the analysis of evolving metal-foam granulates.
复制标题

用于分析演变的金属泡沫颗粒的时间分辨原位断层扫描

DOI:
10.1107/s1600577518008949
复制
发表时间:
2018
影响因子:
2.5
通讯作者:
J. Banhart
J. Banhart
中科院分区:
物理与天体物理3区
文献类型:
--
作者:
F. Garcia-Moreno;P.H. Kamm;T.R. Neu;J. Banhart

文献摘要

参考文献

被引文献

相似文献

一种实验装置已经被开发出来,它允许在德国柏林的BESSY II实验站EDDI使用白X射线束捕获多达25张 S−1的断层图像。关键是使用了新开发的精确而快速的旋转工作台,非常高效的闪烁体和快速的cmos相机。作为首次应用,研究了铝合金颗粒在923 K下的发泡过程。观察到液体材料中气泡的形成和长大,发现气泡的形成和长大受到块体颗粒有限导热系数的影响。在时间间隔为39 ms的两个断层图像帧之间发生的变化可以被检测和定量分析。
An experimental setup has been developed that allows for capturing up to 25 tomograms s−1 using the white X-ray beam at the experimental station EDDI of BESSY II, Berlin, Germany. The key points are the use of a newly developed, precise and fast rotation stage, a very efficient scintillator and a fast CMOS camera. As a first application, the foaming of aluminium alloy granules at 923 K was investigated in situ. Formation and growth of bubbles in the liquid material were observed and found to be influenced by the limited thermal conductivity in the bulk granules. Changes that took place between two tomographic frames separated in time by 39 ms could be detected and analysed quantitatively.
DOI: 10.1107/s0909049509001939
发表时间: 2009-05
影响因子: 2.5
作者:
Rack A;García-Moreno F;Baumbach T;Banhart J
通讯作者: Banhart J
DOI: 10.1016/j.msea.2010.05.073
发表时间: 2010
影响因子: 6.4
作者:
M. Nosko;F. Simančík;R. Florek
通讯作者: R. Florek
下一代电池的原位 X 射线断层扫描:监测反应产物分布和运输过程的系统方法
DOI: 10.1088/0022-3727/49/40/404001
发表时间: 2016
期刊: Journal of Physics D: Applied Physics
影响因子: --
作者:
D. Schröder;C. L. Bender;T. Arlt;M. Osenberg;A. Hilger;S. Risse;M. Ballauff;I. Manke;J. Janek
通讯作者: J. Janek
DOI: 10.1016/j.ejmp.2016.08.012
发表时间: 2016-12-01
影响因子: 3.4
作者:
Lovric, Goran;Mokso, Rajmund;Stampanoni, Marco
通讯作者: Stampanoni, Marco
液态铝合金泡沫动态过程的快速同步X射线断层扫描
DOI: --
发表时间: 2017
期刊:
影响因子: --
作者:
P. H. Kamm;F. García‐Moreno;T. Neu;K. Heim;R. Mokso;J. Banhart
通讯作者: J. Banhart