A review on remanufacture of dies and moulds
A review on remanufacture of dies and moulds
复制标题
模具再制造综述
DOI：
10.1016/j.jclepro.2013.09.014
复制
发表时间：
2014-02
影响因子：
11.1
通讯作者：
Yan He
中科院分区：
文献类型：
--
作者：
Changrong Chen;Yan Wang;Hengan Ou;Yan He
模具是制造工程产品的基本工具，通常由于各种原因在使用一段时间后失效或过时。因此，它们经常需要重新制造。本文的目的是审查目前的最先进的模具再制造和调查的潜在利益和机会与再制造。本文首先论述了模具工业引入再制造的好处。其次，总结了模具再制造与其他产品相比的独特性。研究了主要类型模具的工业修复策略。然后详细介绍了再制造所需的关键技术，包括焊接修复技术、剩余寿命评估方法和可靠性分析。最后，讨论了工业界和学术界面临的挑战和机遇，以便得出几个关键结论。
Dies and moulds, which are essential tools for manufacturing engineered products, usually fail or become obsolete after a certain period of use for a variety of reasons. Thus, they often need remanufacture. The objectives of this paper are to review the current state of the art in remanufacture of dies and moulds and to investigate the potential benefits and opportunities associated with remanufacturing. In this paper, the benefits of introducing remanufacture into the die and mould industry are firstly discussed. This is followed by a summary of the unique characteristics of remanufacturing of dies and moulds compared to those of other products. Industrial repair strategies of the main types of dies and moulds are examined. Key technologies needed for remanufacture are then reviewed in detail including welding repair technologies, remaining useful life evaluation methods, and reliability analysis. Finally, challenges and opportunities facing the industry and academia are discussed in order to draw several key conclusions.
登录
查看更多内容
影响因子：
11.1
作者：
R. Subramoniam;D. Huisingh;R. Chinnam
通讯作者：
R. Subramoniam;D. Huisingh;R. Chinnam
影响因子：
1
作者：
B. Shannon;C. Jaske;M.C. Smith
通讯作者：
B. Shannon;C. Jaske;M.C. Smith
影响因子：
3.3
作者：
M. Aliabadi
通讯作者：
M. Aliabadi
影响因子：
11.1
作者：
Katherine Ortegon;L. Nies;J. Sutherland
通讯作者：
Katherine Ortegon;L. Nies;J. Sutherland
影响因子：
2.7
作者：
Jae-ho;Lee;Jeong-Hwan;Jang;Byeong-Don;Joo;Young-Myung;Son;Young-hoon;Moon
通讯作者：
Jae-ho;Lee;Jeong-Hwan;Jang;Byeong-Don;Joo;Young-Myung;Son;Young-hoon;Moon