Dosimeter properties of CaO transparent ceramic prepared by the SPS method

Dosimeter properties of CaO transparent ceramic prepared by the SPS method
复制标题

SPS法制备CaO透明陶瓷的剂量计性能

DOI:
10.1007/s10854-016-6024-x
复制
发表时间:
2017
期刊:
Journal of Materials Science: Materials in Electronics
影响因子:
--
通讯作者:
T. Yanagida
T. Yanagida
中科院分区:
--
文献类型:
--
作者:
Takumi Kato;G. Okada;T. Yanagida

文献摘要

参考文献

被引文献

相似文献

我们研究了CaO透明陶瓷的光致发光(PL)、闪烁和热刺激发光(TSL)剂量计特性,并与MgO透明陶瓷作为参考进行比较。两个样品都是通过火花等离子烧结方法制成的。在 PL 光谱中,两个样品均显示出 F 和 F+ 中心的发射峰。此外,除了这些峰之外,CaO 和 MgO 均在 330 nm 处检测到闪烁发射峰,这是由表面缺陷引起的。 TSL 辉光曲线显示 CaO 的主峰约为 55 °C,MgO 的主峰约为 140 °C。经证实,TSL 响应在 0.1 至 1000 mGy 的剂量范围内随着照射剂量单调增加。
We have studied photoluminescence (PL), scintillation and thermally-stimulated luminescence (TSL) dosimeter properties of CaO transparent ceramic, in comparison with those of MgO transparent ceramic as a reference. Both samples were made by a Spark Plasma Sintering method. In the PL spectra, both samples showed emission peaks due to F and F+centers. Moreover, in addition to these peaks, a scintillation emission peak was detected at 330 nm for both CaO and MgO, which was caused by surface defects. The TSL glow curves showed a main peak around 55 °C for CaO and 140 °C for MgO. The TSL response was confirmed to monotonically increase with irradiation dose over the dose range from 0.1 to 1000 mGy.
DOI: 10.1109/tns.2009.2032265
发表时间: 2010-06
影响因子: 1.8
作者:
T. Yanagida;A. Yoshikawa;Y. Yokota;K. Kamada;Y. Usuki;S. Yamamoto;M. Miyake;M. Baba;Kazuaki Kumagai;Katsuhisa Sasaki;Masatoshi Ito;Naoto Abe;Y. Fujimoto;S. Maeo;Y. Furuya;Hidehiko Tanaka;A. Fukabori;Targino Rodrigues dos Santos;M. Takeda;N. Ohuchi
通讯作者: T. Yanagida;A. Yoshikawa;Y. Yokota;K. Kamada;Y. Usuki;S. Yamamoto;M. Miyake;M. Baba;Kazuaki Kumagai;Katsuhisa Sasaki;Masatoshi Ito;Naoto Abe;Y. Fujimoto;S. Maeo;Y. Furuya;Hidehiko Tanaka;A. Fukabori;Targino Rodrigues dos Santos;M. Takeda;N. Ohuchi
内野 T:“无定形二氧化硅中过氧自由基缺陷的结构和生成机制”Pys。
DOI: --
发表时间: --
期刊:
影响因子: --
作者:
通讯作者: --