Sensors for the End-cap prototype of the Inner Tracker in the ATLAS Detector Upgrade

Sensors for the End-cap prototype of the Inner Tracker in the ATLAS Detector Upgrade
复制标题

ATLAS 探测器升级中内部跟踪器端盖原型的传感器

DOI:
10.1016/j.nima.2016.07.023
复制
发表时间:
2016
期刊:
Accelerators, Spectrometers, Detectors and Associated Equipment
影响因子:
--
通讯作者:
Benítez V
Benítez V
中科院分区:
--
文献类型:
--
作者:
Benítez V

文献摘要

参考文献

被引文献

相似文献

HL-LHC ATLAS内部跟踪器(ITk)端盖部分的新型硅微带传感器由于其复杂的设计特点,如多种不同的传感器形状,不同的条带间距或内置立体角度,提出了许多挑战。为了研究这些具体问题,“花瓣”原型被定义为一个小的端盖原型。花瓣原型的传感器包括几种新的布局和技术解决方案,以调查问题,他们已经通过合作进行了详细的测试。文中给出了传感器的描述和详细的测试结果。为实现复杂设计的自动布局生成,开发了新的软件工具。传感器已被制造、表征并交付给合作机构,以便在花瓣原型上进行组装。本文描述了从这些传感器上实施的新解决方案的设计和测试中获得的经验教训,这些解决方案正用于全花瓣传感器的开发。这导致ITk条带社区获得必要的专业知识,以开发完整的端帽结构,花瓣。
The new silicon microstrip sensors of the End-cap part of the HL-LHC ATLAS Inner Tracker (ITk) present a number of challenges due to their complex design features such as the multiple different sensor shapes, the varying strip pitch, or the built-in stereo angle. In order to investigate these specific problems, the “petalet” prototype was defined as a small End-cap prototype. The sensors for the petalet prototype include several new layout and technological solutions to investigate the issues, they have been tested in detail by the collaboration. The sensor description and detailed test results are presented in this paper. New software tools have been developed for the automatic layout generation of the complex designs. The sensors have been fabricated, characterized and delivered to the institutes in the collaboration for their assembly on petalet prototypes. This paper describes the lessons learnt from the design and tests of the new solutions implemented on these sensors, which are being used for the full petal sensor development. This has resulted in the ITk strip community acquiring the necessary expertise to develop the full End-cap structure, the petal.
用于 ATLAS 跟踪器升级的嵌入式俯仰适配器
影响因子: 1.4
作者:
M. Ullán;V. Benitez;G. Pellegrini;C. Fleta;M. Lozano;C. Lacasta;U. Soldevila;C. García
通讯作者: C. García
用于高亮度大型强子对撞机 ATLAS 升级带状跟踪器的双面无屏蔽板条原型
DOI: 10.1088/1748-0221/9/03/p03012
发表时间: 2014
影响因子: 1.3
作者:
Díez S
通讯作者: Díez S
用于 ATLAS HL-LHC 升级的正向硅带系统
DOI: --
发表时间: 2013
期刊:
影响因子: --
作者:
M. Aliev;D. Ariza;T. Barber;V. Benitez;J. Bernabeu;I. Bloch;R. Brenner;T. Dilger;C. Friedrich;N. Görrissen;I. Gregor;M. Hauser;D. Joos;S. Kuehn;C. Lacasta;H. Lacker;B. Lecini;K. Mahboubi;R. Marco;I. Messmer;U. Parzefall;V. Prahl;L. Rehnisch;D. Santoyo;U. Soldevilla;M. Stanitzki;M. Ullán;S. Wonsak
通讯作者: S. Wonsak
为 ATLAS 升级的端盖跟踪器设计和制造传感器原型
DOI: --
发表时间: 2012
期刊: Nuclear Science Symposium and Medical Imaging Conference
影响因子: --
作者:
V. Benitez;M. Ullán;C. Lacasta;G. Pellegrini;C. Fleta;C. García;M. Lozano
通讯作者: M. Lozano
嵌入式节距适配器:条形传感器的高产量互连解决方案
DOI: --
发表时间: 2016
期刊:
影响因子: --
作者:
M. Ullán;P. Allport;M. Baca;J. Broughton;A. Chisholm;K. Nikolopoulos;S. Pyatt;J. Thomas;J. Wilson;J. Kierstead;P. Kuczewski;D. Lynn;L. Hommels;C. Fleta;J. Fernandez;D. Quirion;I. Bloch;S. Díez;I. Gregor;K. Lohwasser;L. Poley;K. Tackmann;M. Hauser;K. Jakobs;S. Kuehn;K. Mahboubi;R. Mori;U. Parzefall;A. Clark;D. Ferrere;S. Sevilla;J. Ashby;A. Blue;R. Bates;C. Buttar;F. Doherty;T. Mcmullen;F. Mcewan;V. O’Shea;S. Kamada;K. Yamamura;Y. Ikegami;K. Nakamura;Y. Takubo;Y. Unno;R. Takashima;A. Chilingarov;H. Fox;A. Affolder;G. Casse;P. Dervan;D. Forshaw;A. Greenall;S. Wonsak;M. Wormald;V. Cindro;G. Kramberger;I. Mandić;M. Mikuž;I. Gorelov;M. Hoeferkamp;P. Palni;S. Seidel;A. Taylor;K. Toms;R. Wang;N. Hessey;N. Valencic;K. Hanagaki;K. Hanagaki;Z. Doležal;P. Kodyš;J. Bohm;M. Mikestikova;A. Bevan;G. Beck;C. Milke;M. Domingo;V. Fadeyev;Z. Galloway;D. Hibbard;Zhijun Liang;H. Sadrozinski;A. Seiden;K. To;R. French;P. Hodgson;H. Marin;K. Parker;O. Jinnouchi;K. Hara;J. Bernabeu;J. V. Civera;C. García;C. Lacasta;S. Garcia;D. Rodriguez;D. Santoyo;C. Solaz;U. Soldevila
通讯作者: U. Soldevila