A generalized DGS method for studying the deformation field around a crack tip
A generalized DGS method for studying the deformation field around a crack tip
复制标题
研究裂纹尖端周围变形场的通用 DGS 方法
DOI:
10.1016/j.optlaseng.2015.11.003
复制
发表时间:
2016-04
影响因子:
4.6
通讯作者:
Cheng Heming
中科院分区:
文献类型:
--
作者:
Zhang Rui;Guo Ran;Cheng Heming
A generalized method for calculating the stress intensity factor from angular deflection of light rays is proposed. The method is based on 2D digital image correlation (DIC) to measure angular deflection of light rays, however, when a specimen is subjected to loading, deformation measurement from DIC is not perfect because of the existence of small in-plane and out-of-plane motions of the test sample surface that occurred after loading. These disadvantages will lead to errors in the measured angular deflections and fracture parameters. The influence of unavoidable in-plane and out-of-plane motions is discussed, and a generalized method to eliminate them to show the pure stress gradient of the crack tip of Polymethyl Methacrylate (PMMA) is demonstrated. At the same time, the fracture parameter of stress intensity was calculated. The experimental angular deflection of light rays was compared with the theoretical angular deflection predicted by generalized model using data points in an array around the crack tip region. To show the potential and efficacy of the method,Kvalues were obtained from experimental data during tests conducted in a PMMA three-point-bend specimen. Results show an excellent level of agreement withKvalues predicted from FEM, highlighting the potential of the proposed methodology.
登录
查看更多内容
影响因子:
3.8
作者:
Qinwei Ma;Shaopeng Ma
通讯作者:
Qinwei Ma;Shaopeng Ma
影响因子:
2.4
作者:
B. Pan;Liping Yu;Dafang Wu
通讯作者:
B. Pan;Liping Yu;Dafang Wu
影响因子:
2.4
作者:
Periasamy, C.;Tippur, H. V.
通讯作者:
Tippur, H. V.
DOI:
10.1364/ao.53.008350
发表时间:
2014-12
期刊:
Appl Opt
影响因子:
--
作者:
Zhang, Rui;Guo, Ran;Cheng, Heming
通讯作者:
Cheng, Heming
影响因子:
2.4
作者:
Ma Kang;Xie Huimin;Zhu Jianguo
通讯作者:
Zhu Jianguo