Ketjen Black–titanium dioxide coated glass fiber separator for high performance Li/S cells using bare sulfur cathode

Ketjen Black–titanium dioxide coated glass fiber separator for high performance Li/S cells using bare sulfur cathode
复制标题

Ketjen Black — 用于使用裸硫阴极的高性能 Li/S 电池的二氧化钛涂层玻璃纤维隔膜

DOI:
10.1007/s10854-019-01022-8
复制
发表时间:
2019-03
期刊:
Journal of Materials Science: Materials in Electronics
影响因子:
--
通讯作者:
Liu Xiaomin
Liu Xiaomin
中科院分区:
其他
文献类型:
--
作者:
Wan Yonghua;Hong Yilun;Bei Xinwei;Hao Junwei;You Hairui;Niu Congsu;Yang Hui;Liu Xiaomin

文献摘要

参考文献

被引文献

相似文献

Sulfur is considered as one of the promising cathode candidates for the next generation secondary batteries due to its high theoretical capacity. Several issues, such as the insulation of sulfur and the shuttle effect caused by highly soluble polysulfides, are alleviated by encapsulating sulfur into a conductive framework. However, those methods inevitably sacrifice both the gravimetrically and volumetrically energy density of the fabricated cells. In this context, the issues mentioned above are ameliorated via a commercial Glass Fiber membrane coated with Ketjen Black (KB, commercial EC 600 JD) and titanium dioxide (TiO2) as the separator. Bare sublimed sulfur is employed as the cathode. When being cycled at 0.2 C, the Li/S cell, using the membrane coating 20 wt% TiO2and 50 wt% KB as separator, presents 1196 and 729 mAh g−1in the 1st and 200th cycle, respectively. Even being cycled at 2 C, the cell still shows 531 mAh g−1reversible capacity after 100 cycles. Such good performance could be attributed to: (1) the highly conductive KB within the coated layer offers additional electron pathways covering the top surface of the bare sulfur cathode and (2) the coated layer can form chemical binding with lithium polysulfides via TiO2and physically adsorb the lithium polysulfides through KB, both alleviating the shuttle effect.
在隔膜上密集涂覆Li4Ti5O12和石墨烯混合物可提高锂硫电池的长循环寿命
DOI: 10.1016/j.nanoen.2016.09.030
发表时间: 2016-12
期刊: Nano Energy
影响因子: 17.6
作者:
Zhao Yan;Liu Ming;Lv Wei;He Yan-Bing;Wang Chao;Yun Qinbai;Li Baohua;Kang Feiyu;Yang Quan-Hong
通讯作者: Yang Quan-Hong
具有增强高倍率性能的聚苯胺涂层硫/碳复合材料作为锂/硫电池正极材料
DOI: 10.1002/aenm.201200017
发表时间: 2012-10-01
影响因子: 27.8
作者:
Li, Guo-Chun;Li, Guo-Ran;Gao, Xue-Ping
通讯作者: Gao, Xue-Ping
DOI: 10.1021/nl200658a
发表时间: 2011-07-01
期刊: NANO LETTERS
影响因子: 10.8
作者:
Wang, Hailiang;Yang, Yuan;Dai, Hongjie
通讯作者: Dai, Hongjie
DOI: 10.1039/c5ra26476f
发表时间: 2016
期刊: RSC ADVANCES
影响因子: 3.9
作者:
Zhao Di;Qian Xinye;Jin Lina;Yang Xiaolong;Wang Shanwen;Shen Xiangqian;Yao Shanshan;Rao Dewei;Zhou Youyuan;Xi Xiaoming
通讯作者: Xi Xiaoming
DOI: 10.1016/j.memsci.2016.01.020
发表时间: 2016-04
影响因子: 9.5
作者:
Jiadeng Zhu;Meltem Yanilmaz;Kun Fu;Cheng Chen;Yao Lu;Yeqian Ge;David Inhyuk Kim;Xiangwu Zhang-
通讯作者: Jiadeng Zhu;Meltem Yanilmaz;Kun Fu;Cheng Chen;Yao Lu;Yeqian Ge;David Inhyuk Kim;Xiangwu Zhang-