Gear Rolling Process
Gear Rolling Process
复制标题
滚齿工艺
DOI：
10.1007/978-3-642-32448-2_22
复制
发表时间：
2013
影响因子：
4.6
通讯作者：
T. Druwe
中科院分区：
文献类型：
--
作者：
R. Neugebauer;U. Hellfritzsch;Mike Lahl;Matthias Milbrandt;S. Schiller;T. Druwe
轧制工艺是目前专门用于生产高速齿轮的切削工艺的有效替代方案，特别是在经济和生态方面。与切削方法相比，通过成型（特别是通过滚压）制造渐开线齿轮齿形具有多个优点，例如： g。加工时间显着缩短，无材料损失，因此不会产生切屑处理，成形区域的强度增加，表面质量高。由于这些特性，齿轮成形将继续在未来的齿轮制造中发挥重要作用。本章介绍了 Fraunhofer IWU Chemnitz 为通过提高齿轮质量来推进高级齿轮轧制工艺所做的努力。它介绍了齿轮滚压中工具、机器和成形过程之间相互作用的调查和分析。显示高齿轮滚压过程中工件、刀具和夹紧装置位移的测量结果。还给出了成形过程的伴随模拟的设置和结果。
The rolling process is an efficient alternative to currently exclusively applied cut-ting processes for the production of high gears, particularly regarding economic and ecological aspects. The manufacturing of involute gear profiles by forming, specifically by rolling, has several advantages in comparison to cutting methods, e. g. significantly shorter process times, no material loss and subsequently no chip disposal, strength increase in the forming zone and a high surface quality. Due to these characteristics gear forming will continue to gain relevance in future gear manufacturing. The Chapter presents the efforts being made at the Fraunhofer IWU Chemnitz to reach an advancement of the high gear rolling process by improving the gearing qualities. It presents the investigation and analysis of the interaction between tools, machine and forming process in gear rolling. The results of measurements on the displacements of workpiece, tools and clamping device during the rolling process of a high gearing are displayed. The setup and results of accompanying simulation of the forming process are also given.
影响因子：
1.7
作者：
Neugebauer, Reimund;Klug, Dirk;Hellfritzsch, Udo
通讯作者：
Hellfritzsch, Udo