Prototyping of hybrids and modules for the forward silicon strip tracking detector for the ATLAS Phase-II upgrade
Prototyping of hybrids and modules for the forward silicon strip tracking detector for the ATLAS Phase-II upgrade
复制标题
用于 ATLAS 第二阶段升级的前向硅带跟踪探测器的混合体和模块原型设计
DOI：
10.1088/1748-0221/12/05/p05015
复制
发表时间：
2017
影响因子：
1.3
通讯作者：
P. Phillips
中科院分区：
文献类型：
--
作者：
S. Kuehn;V. Benitez;J. Fernandez;C. Fleta;M. Lozano;M. Ullán;H. Lacker;L. Rehnisch;D. Sperlich;D. Ariza;I. Bloch;S. Díez;I. Gregor;J. Keller;K. Lohwasser;L. Poley;V. Prahl;N. Zakharchuk;M. Hauser;K. Jakobs;K. Mahboubi;R. Mori;U. Parzefall;J. Bernabeu;C. Lacasta;R. Marco;D. Santoyo;C. S. Contell;U. S. Serrano;T. Affolder;A. Greenall;B. Gallop;P. Phillips
对于大型强子对撞机的高光度升级，预计瞬时光度将增加到7.5 <$1034 cm−2 s−1，导致总积分光度高达3000 fb−1。ATLAS实验中现有的硅和过渡辐射跟踪探测器将无法科普轨道密度和辐射水平的增加，需要更换。新的跟踪探测器将完全由硅像素和条带探测器组成。在本文中，结果的发展和测试的原型组件的新的硅条探测器的前向区域（端盖）的ATLAS探测器。柔性印刷读出板与快速读出芯片，被称为混合动力车，和硅探测器模块进行了研究。这些模块由粘在硅条传感器上的混合物组成。两者上的通道通过焊线连接，用于读出和供电。测量的重要性能参数和两种可能的读出方案的比较。此外，装配过程中描述和建议，进一步原型。
For the High-Luminosity upgrade of the Large Hadron Collider an increased instantaneous luminosity of up to 7.5 ⋅ 1034 cm−2 s−1, leading to a total integrated luminosity of up to 3000 fb−1, is foreseen. The current silicon and transition radiation tracking detectors of the ATLAS experiment will be unable to cope with the increased track densities and radiation levels, and will need to be replaced. The new tracking detector will consist entirely of silicon pixel and strip detectors. In this paper, results on the development and tests of prototype components for the new silicon strip detector in the forward regions (end-caps) of the ATLAS detector are presented. Flex-printed readout boards with fast readout chips, referred to as hybrids, and silicon detector modules are investigated. The modules consist of a hybrid glued onto a silicon strip sensor. The channels on both are connected via wire-bonds for readout and powering. Measurements of important performance parameters and a comparison of two possible readout schemes are presented. In addition, the assembly procedure is described and recommendations for further prototyping are derived.
ATLAS 探测器升级中内部跟踪器端盖原型的传感器
DOI：
10.1016/j.nima.2016.07.023
发表时间：
2016
期刊：
Accelerators, Spectrometers, Detectors and Associated Equipment
影响因子：
--
作者：
Benítez V
通讯作者：
Benítez V
ATLAS 内部跟踪器升级版前向探测器的辐照硅带传感器性能评估
DOI：
10.1016/j.nima.2016.04.044
发表时间：
2016
期刊：
Accelerators, Spectrometers, Detectors and Associated Equipment
影响因子：
--
作者：
Mori R
通讯作者：
Mori R