Load Capacity of Rolling Contacts Manufactured by Wire EDM Turning
Load Capacity of Rolling Contacts Manufactured by Wire EDM Turning
复制标题
线切割车削制造的滚动接触件的负载能力
DOI：
10.1016/j.procir.2020.02.111
复制
发表时间：
2020
期刊：
影响因子：
--
通讯作者：
Brimmers
中科院分区：
文献类型：
--
作者：
Tombul;Mevissen;Brimmers
Previous investigations have shown that load carrying capacity of gears manufactured by wire EDM is three times higher than ground gears for short time contact fatigue tests. Typical EDM surfaces are characterized by discharge craters, which lead to beneficial running-in topography formation. Investigations of tooth flank load-carrying capacity of specimen represent the tribological performance of rolling contacts. In gear testing, a tribological comparable disk-on-disk test is performed to reduce effort and costs during machining gears with complex geometries. For this purpose, testing shafts with high geometrical accuracy and different surface qualities were manufactured by wire EDM on a single-axis rotary indexing table. Following, the surface integrity and performance of these specimens on the disk-on-disk test were investigated focusing on short time contact fatigue strength and running-in behavior.
齿轮应用中高强度材料系统点蚀损伤的裂纹扩展分析
DOI：
--
发表时间：
2017
期刊：
影响因子：
--
作者：
C. Brecher;C. Löpenhaus;D. Mevissen;F. Goergen
通讯作者：
F. Goergen
分析特征工艺参数以识别线切割加工过程中的不稳定工艺条件
DOI：
10.1016/j.promfg.2018.11.018
发表时间：
2018
期刊：
Procedia Manufacturing
影响因子：
--
作者：
Tombul;Herrig;Olivier;Klocke
通讯作者：
Klocke
使用线切割调整齿轮表面完整性以增加齿面承载能力
DOI：
--
发表时间：
2016
期刊：
影响因子：
--
作者：
Deniz Sari;D. Welling;C. Löpenhaus;F. Klocke;A. Klink
通讯作者：
A. Klink