THERMAL ANALYSIS OF INTRAOCULAR ELECTRONIC DISPLAY PROJECTOR VISUAL PROSTHESIS.
THERMAL ANALYSIS OF INTRAOCULAR ELECTRONIC DISPLAY PROJECTOR VISUAL PROSTHESIS.
复制标题
DOI：
10.1080/10407782.2020.1805230
复制
发表时间：
2020
期刊：
影响因子：
--
通讯作者：
Foster CD
中科院分区：
文献类型：
--
作者：
Gongal D;Thakur S;Panse A;Pawar R;Yu CQ;Foster CD
角膜混浊是导致失明的主要原因，约占全球失明的4%。由于角膜浑浊，光线无法穿过角膜在视网膜上形成清晰的图像，导致失明。为了解决这一问题，设计了一种眼内投影仪。这种装置在使用时会产生热量。根据国际标准规定，由于医疗器械，组织表面的温度不应上升超过2°C。为了确定该眼内电子装置的功率平衡，对两种不同的眼模型进行了稳态热有限元分析。该设备被放置在距离视网膜9.98毫米的地方，第一种型号的最大功率为82兆瓦，第二种型号的最大功率为91兆瓦。为了减少对组织的加热，该装置延长了0.5毫米，形成了一个充当绝缘体的气隙。然后，在100兆瓦下，最近的活组织中的温度降到了规定的2摄氏度以下。
Corneal opacity is a leading cause of blindness, accounting for about 4% of global blindness. With corneal opacity, light is unable to pass through the cornea to form a clear image on the retina, resulting in blindness. To address this condition, an intraocular projection device has been designed. This device, while in use, would produce heat. According to international standard regulations, the temperature on the surface of the tissues should not increase more than 2°C due to medical devices. In order to establish the power budget of this intraocular electronic device, a steady state thermal finite element analysis was conducted on two different eye models. The device was placed at 9.98 mm from the retina, and was seen to run up to a maximum power of 82 mW for the first model and 91 mW for the second model. To reduce heating of tissues, the device was extended by 0.5 mm to create an air gap which acted as an insulator. The temperature in the nearest living tissue then dropped below the prescribed limit of 2°C at 100 mW.
登录
查看更多内容
影响因子：
4.6
作者：
Opie, Nicholas L.;Burkitt, Anthony N.;Grayden, David B.
通讯作者：
Grayden, David B.
影响因子：
1.1
作者：
Sharqawy, Mostafa H.;Lienhard, John H., V;Zubair, Syed M.
通讯作者：
Zubair, Syed M.
影响因子：
2.8
作者：
Bartels, MC;Doxiadis, IIN;Beekhuis, WH
通讯作者：
Beekhuis, WH
影响因子：
4.1
作者：
Pascolini, Donatella;Mariotti, Silvio Paolo
通讯作者：
Mariotti, Silvio Paolo
影响因子：
--
作者：
Piyathaisere, DV;Margalit, E;Humayun, MS
通讯作者：
Humayun, MS