Engineering Research Equipment Grant: CAD/CAM Workstation for Semi-Automated Design for Manufacturability

工程研究设备补助金：用于半自动化设计的 CAD/CAM 工作站以实现可制造性

• 批准号: 8705212
• 负责人: Prakash Krishnaswami
• 金额: $ 2.35万
• 依托单位: Kansas State University
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 1987
• 资助国家: 美国
• 起止时间: 1987-07-01 至 1989-06-30
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=8705212&HistoricalAwards=false
• 关键词: Engineering; Research; Equipment; Grant; CAD

Design and manufacture are often treated as independent activities, resulting in designs that are difficult or expensive to manufacture. The goal of designing for manufacturability is to ensure that the final design is satisfactory not only in performance, but also in producibility. To account for manufacturing considerations in the design stage, techniques are being developed that are semi-automatic that still demand considerable user interaction. Consequently, implementation requires an effective graphical interface to permit the user to communicate with the program. Therefore, the implementation is best done on a CAD/CAM workstation with advanced graphics capabilities. This grant provides a CAD/CAM workstation to be used for research in the field of design for manufacturability.

设计和制造通常被视为独立的活动，导致设计制造起来困难或昂贵。 可制造性设计的目标是确保最终设计不仅在性能方面令人满意，而且在可生产性方面也令人满意。 为了在设计阶段考虑制造因素，正在开发半自动技术，但仍然需要大量的用户交互。 因此，实现需要一个有效的图形界面来允许用户与程序进行通信。 因此，最好在具有高级图形功能的 CAD/CAM 工作站上完成实施。 该赠款提供了一个 CAD/CAM 工作站，用于可制造性设计领域的研究。