The Interplay of Mechanics with Microstructure and Processing in MMC and CMC Joints

MMC 和 CMC 接头中力学与微观结构和加工的相互作用

• 批准号: 9634927
• 负责人: Frederick Leckie
• 金额: --
• 依托单位: University of California-Santa Barbara
• 依托单位国家: 美国
• 项目类别: Continuing grant
• 财政年份: 1996
• 资助国家: 美国
• 起止时间: 1996-10-01 至 2000-06-30
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=9634927&HistoricalAwards=false
• 关键词: Interplay; Mechanics; Microstructure; Processing; MMC

9634927 Leckie This project is to study the fundamental aspects of joints in metal (MMC) and ceramic (CMC) matrix composite structures. The research philosophy emphasizes the understanding of the underlying mechanics and its relationship to microstructure and processing. The research approach is based on the design, manufacturing, characterization and analysis of relatively simple joint geometries which allow the study of individual features of the physical problem and its underlying mechanisms, e.g. the strength of the interfaces defined by the fiber ends and the associated debond process. The MMC research will focus on aluminum alloys reinforced with polycrystalline alumina fibers while the CMC joints will be fabricated by vacuum infiltration of multi-alumina slurries into polycrystalline alumina fiber cloth arranged in layers with prescribed discontinuities. The microstructure and delamination resistance of these joints can be modified by suitable control of the sintering temperature and other manufacturing parameters. The emphasis will be identifying the relevant mechanisms and their relationship to processing via microstructure and defects. ***

9634927莱基这个项目是研究金属(MMC)和陶瓷(CMC)基复合材料结构中接头的基本方面。研究哲学强调对潜在机制及其与微观结构和加工的关系的理解。研究方法基于相对简单的接头几何结构的设计、制造、表征和分析，这些几何结构允许研究物理问题的个别特征及其潜在机制，例如由光纤末端定义的界面的强度和相关的脱粘过程。MMC的研究将集中在用多晶氧化铝纤维增强的铝合金上，而CMC接头将通过真空渗透多晶氧化铝浆料到按规定的不连续层排列的多晶氧化铝纤维布中来制造。通过适当控制烧结温度和其他工艺参数，可以改变接头的显微组织和抗分层性能。重点将是通过微观结构和缺陷来确定相关的机制及其与加工的关系。***