A new abrasive waterjet milling technology and process models for fabricating energy-efficient electrical machines from amorphous magnetic metal laminations

用于用非晶磁性金属叠片制造节能电机的新型磨料水射流铣削技术和工艺模型

• 批准号: LP0989304
• 负责人: Prof Jun Wang
• 金额: $ 24.35万
• 依托单位: The University of New South Wales
• 依托单位国家: 澳大利亚
• 项目类别: Linkage Projects
• 财政年份: 2009
• 资助国家: 澳大利亚
• 起止时间: 2009-06-15 至 2012-06-30
• 项目状态: 已结题
• 来源: https://dataportal.arc.gov.au/RGS/Web/Grants/LP0989304
• 关键词: new; abrasive; waterjet; milling; technology

As the most energy-efficient core material for electrical machines, amorphous magnetic metal (AMM) can save more than 36% of the energy wasted by ordinary electrical motors. Since electrical motors consume about 70% of all the electricity generated, if all electrical motors in Australia use AMM as the core material, an annual energy saving worth approximately $4 billion and an annual reduction of 16 million tonnes of greenhouse gas emission in Australia are expected based on the predicted electricity consumption in 2010. This project will develop a new technology for fabricating larger electrical machines from AMM laminations. It targets the national research priorities in Frontier Technologies and An Environmentally Sustainable Australia.

作为最节能的电机铁芯材料，非晶磁性金属（AMM）可以节省普通电机浪费的36%以上的能量。由于电动机消耗约70%的发电量，如果澳大利亚所有电动机都使用AMM作为核心材料，根据2010年的预测用电量，预计澳大利亚每年可节省约40亿美元的能源，每年可减少1600万吨温室气体排放。该项目将开发一种新技术，用于制造AMM叠片的大型电机。它针对前沿技术和环境可持续澳大利亚的国家研究优先事项。