EAGER: Collaborative Research: Fully water-soluble bioelectronics with skin-conforming galactomannan

EAGER：合作研究：完全水溶性生物电子学与皮肤适形半乳甘露聚糖

• 批准号: 1933051
• 负责人: Hongli Zhu
• 金额: $ 3.25万
• 依托单位: Northeastern University
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 2019
• 资助国家: 美国
• 起止时间: 2019-07-01 至 2020-06-30
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=1933051&HistoricalAwards=false
• 关键词: EAGER; Collaborative; Research; Fully; water

This EAGER project aims to realize the biodegradable epidermal devices by fabricating fully water-soluble zinc sensors on a water-soluble and ultra-smooth galactomannan substrate that is obtained from seeds with an environmentally-friendly aqueous extraction method. While there has been increasing attention to exploring biocompatible and biodegradable materials for implantable monitors and disposable epidermal sensors, the substrates are often associated with poor biodegradability, high surface roughness, lack of conformability, and expensive chemical synthesis approaches. In this project, various zinc sensors on the nature-derived galactomannan substrate will be fabricated, characterized, and benchmarked. The resulting disposable electronics can be programmed to dissolve in water, and further produce environmentally benign end-products, which can be used for alkaline soil amendments. Considering the numerous human health benefits such as reducing blood glucose and low-density lipoprotein cholesterol levels of the water-soluble galactomannan, the results from this study will also enable the future development of biomedical implants. Additionally, the research will be tightly coupled with a comprehensive educational program that will expose undergraduate and underrepresented students to interdisciplinary technologies through early engagement and research training on the design and fabrication of fully water-soluble sensors. Significant efforts have been devoted to reducing the bending stiffness of epidermal devices to improve the contact quality at the device-skin interface and to yield high-quality sensing data. As the bending stiffness of the device is primarily affected by the modulus and thickness of each device layer, successful demonstrations include the use of low-modulus substrate or exploration of thin device structures. However, the materials are limited in the former, and low-cost fabrication is challenging in the latter. Additionally, non-water-soluble properties of both classes create electronic waste streams, posing environmental concerns. An innovative, fully water-soluble bioelectronic device is proposed in which zinc sensors are fabricated on the galactomannan substrate through a low-cost fabrication process. The objective of this project is to carry out a feasibility study that water-soluble bioelectronics on a skin-conforming galactomannan film can form a conformal contact with the hierarchically textured skin surface and reduce the contact impedance. Two research tasks are proposed to accomplish the feasibility study: (1) fabricating capacitive zinc electrodes and temperature sensors on the skin-conforming galactomannan films, and (2) characterizing water-soluble zinc sensors to benchmark their performance, particularly against motion artifacts. By following arbitrary skin deformations without mechanical failure, the new class of fully disposable, high-performance, and low-cost electronic devices can significantly improve the contact quality at the device-skin interface and reduce the susceptibility to motion artifacts.This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.

该EAGER项目旨在通过在水溶性和超光滑的半乳甘露聚糖基底上制造完全水溶性的锌传感器来实现可生物降解的表皮装置，所述半乳甘露聚糖基底是通过环境友好的水提取方法从种子中获得的。虽然人们越来越关注探索用于可植入监测器和一次性表皮传感器的生物相容性和生物可降解材料，但基材通常与生物降解性差、表面粗糙度高、缺乏适形性和昂贵的化学合成方法相关。在这个项目中，各种锌传感器上的天然半乳甘露聚糖基板将制造，表征和基准。由此产生的一次性电子产品可以编程溶解在水中，并进一步产生环境友好的最终产品，可用于碱性土壤改良剂。考虑到水溶性半乳甘露聚糖对人类健康的许多益处，如降低血糖和低密度脂蛋白胆固醇水平，本研究的结果也将使生物医学植入物的未来发展成为可能。此外，该研究将与一个全面的教育计划紧密结合，该计划将通过对完全水溶性传感器的设计和制造的早期参与和研究培训，使本科生和代表性不足的学生接触跨学科技术。已经致力于降低表皮装置的弯曲刚度以改善装置-皮肤界面处的接触质量并产生高质量的感测数据。由于器件的抗弯刚度主要受每个器件层的模量和厚度的影响，因此成功的演示包括使用低模量衬底或探索薄器件结构。然而，前者的材料有限，后者的低成本制造具有挑战性。此外，这两类材料的非水溶性特性会产生电子废物流，造成环境问题。提出了一种创新的、完全水溶性的生物电子器件，其中锌传感器通过低成本的制造工艺制造在半乳甘露聚糖基底上。本项目的目的是进行一项可行性研究，即在皮肤贴合半乳甘露聚糖膜上的水溶性生物电子器件可以与分层纹理皮肤表面形成共形接触，并降低接触阻抗。提出了两项研究任务来完成可行性研究：（1）在符合皮肤的半乳甘露聚糖膜上制造电容性锌电极和温度传感器，以及（2）表征水溶性锌传感器以基准其性能，特别是针对运动伪影。通过跟踪任意皮肤变形而不发生机械故障，这种新型的完全一次性、高性能和低成本的电子设备可以显著改善设备-皮肤界面的接触质量，并降低对运动伪影的敏感性。该奖项反映了NSF的法定使命，并通过使用基金会的智力价值和更广泛的影响审查标准进行评估，被认为值得支持。

项目成果

Lightweight and Construable Magnetic Wood for Electromagnetic Interference Shielding

• DOI: 10.1002/adem.202000257
• 发表时间: 2020-06-17
• 期刊: ADVANCED ENGINEERING MATERIALS
• 影响因子: 3.6
• 作者: Cheng, Zheng;Wei, Yuyi;Zhu, Hongli
• 通讯作者: Zhu, Hongli