スクラップ鉄からの複合電解析出を利用した高機能鉄鋼材料の創製
利用废铁复合电解沉积制造高性能钢材
基本信息
- 批准号:13875129
- 负责人:
- 金额:$ 1.41万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Exploratory Research
- 财政年份:2001
- 资助国家:日本
- 起止时间:2001 至 2002
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
リサイクルの持続性および経済性を考えるとき、元の性質と同等かそれ以上の特性を有する材料に再生できると有効的である.鉄鋼材料のリサイクルを容易にする上で、現在、問題となっている循環性元素除去の課題を克服し、同時に超微細組織あるいは好ましい集合組織を単純組成鋼で実現し、従来の特性を凌駕する特性をもつ鉄鋼材料を創製することをねらって研究を進めた.しかし、リサイクルのために過剰な環境負荷がかかると意味をなさないので、LCA的な考察も行なった.本手法は集合組織制御法として有望で、通常の鋼板のランクフォード(r)値が1.5から3.0程度なのに対して、高純度純鉄電着板では7.0超える特性が得られることを明らかにした.板面に、強い<111>繊維状集合組織を有し、種々な温度で引張試験を行ったところ、室温では電着状態で大きなr値が得られるが、結晶粒がほぼ等軸粒に成長した焼なまし材ではr値は2前後に減少した.表面のすべり線をレーザー顕微鏡で定量的に測定し、TEMより内部変形組織変化を観察した結果、r値の高い原因は微細柱状晶多結晶体の常温における粒界すべりであることを明らかにした.そのため、粒界すべりの発生しにくい低温で変形させるとr値が低下する.なお、r値は電解条件に依存して変化する.電解溶液、電圧・電流、pH、浴の温度等に関する最適条件について検討し、アルミナ粉末を巻き込ませて微細組織の高温安定化等も検討した.
The property of the material is similar to that of the material. Iron and steel materials are easy to develop, present, problems, cyclic element removal problems to overcome, and ultra-fine structure, good aggregate structure, pure composition of steel, present, and unique characteristics to create iron and steel materials. The environmental load of the LCA is not limited to the LCA. This method is expected to improve the overall structure control method, the normal steel plate has a value of 1.5 to 3.0, and the high-purity pure ferroelectric plate has a characteristic of 7.0 to 7.0. The plate surface<111>, the strong medium dimensional aggregate structure, the kind of temperature, the tensile test, the line temperature, the room temperature, the electric state, the large r value, the crystal grain, the shaft grain, the growth, the burning, the material, the r value, the two before and after. Surface microscopes are used to measure quantitatively, TEM is used to measure the microstructure of fine columnar crystals at room temperature, and TEM is used to measure the microstructure of fine columnar crystals. The temperature is low and the temperature is low. It depends on the electrolysis conditions. The optimum conditions for the preparation of electrolyte solution, voltage, current, pH, bath temperature, etc. are discussed.
项目成果
期刊论文数量(4)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
茂木高志, 増山真司, 飯田薫子, 鈴木徹也, 佐藤英男, 友田 陽: "高純度電解析出鉄における塑性異方性"鉄と鋼. 88巻11号. 801-807 (2002)
Takashi Mogi、Shinji Masuyama、Kaoruko Iida、Tetsuya Suzuki、Hideo Sato、Y. Tomoda:“高纯度电解沉积铁中的塑性各向异性”Tetsu-to-Hagane Vol. 88,No. 11. 801-807 (2002)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
W.Tamaki, S.Masuyama, T.Motegi, K.Iida, Y.Tomota, T.Suzuki, H.Sato: "Application of an electro-deposition method to produce iron sheet with an extremely high r-value and discussion on scrap recycle"Current Advance in Materials and Processing ISIJ. 15巻6号.
W.Tamaki、S.Masuyama、T.Motegi、K.Iida、Y.Tomota、T.Suzuki、H.Sato:“应用电沉积方法生产具有极高 r 值的铁片以及关于废料回收”材料和加工的最新进展 ISIJ。第 15 卷,第 6 期。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
友田 陽其他文献
Stress-Strain Curves of Steels
钢材的应力应变曲线
- DOI:
10.2355/tetsutohagane.100.1191 - 发表时间:
2014 - 期刊:
- 影响因子:0
- 作者:
土田紀之;ステファヌス・ハルヨ;大貫貴久;友田 陽 - 通讯作者:
友田 陽
様々な結晶粒径を持つフェライトーセメンタイト鋼の応力-ひずみ関係
不同晶粒尺寸铁素体-渗碳体钢的应力-应变关系
- DOI:
- 发表时间:
2007 - 期刊:
- 影响因子:0
- 作者:
土田 紀之;原田 泰典;深浦 健三;友田 陽;長井 寿 - 通讯作者:
長井 寿
Nucleation Mechanism of 40-degree <111> Rotated Grains during Recry stallization in Heavily Cold-Rolled Ni_3Al Single Crystals
厚冷轧Ni_3Al单晶再结晶过程中40度<111>旋转晶粒的成核机制
- DOI:
- 发表时间:
2007 - 期刊:
- 影响因子:0
- 作者:
土田 紀之;原田 泰典;深浦 健三;友田 陽;長井 寿;Masahiko Demura - 通讯作者:
Masahiko Demura
Effect of Heat Treatment on the Ductility of Ni(γ)/Ni_3Al (γ') Two-phase Alloy Foils
热处理对Ni(γ)/Ni_3Al(γ)两相合金箔塑性的影响
- DOI:
- 发表时间:
2007 - 期刊:
- 影响因子:0
- 作者:
土田 紀之;原田 泰典;深浦 健三;友田 陽;長井 寿;Masahiko Demura;Masahiko Demura;Masahiko Demura;Motonori Nakamuraa - 通讯作者:
Motonori Nakamuraa
産総研つくばセンター電子加速器施設の現状
AIST筑波中心电子加速器设施的现状
- DOI:
- 发表时间:
2022 - 期刊:
- 影响因子:0
- 作者:
田中 真人;池浦 広美;大島 永康;大平 俊行;小川 博嗣;ORourke Eugene Brian;加藤 英俊;木野 幸一;木村 大海;黒田 隆之助;佐藤 大輔;澁谷 達則;鈴木 良一;清 紀弘;藤原 健;三浦 永祐;満汐 孝治;安本 正人;山脇 正人;堀 利彦;友田 陽;室賀 岳海;古坂 道弘;林﨑 規託 - 通讯作者:
林﨑 規託
友田 陽的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('友田 陽', 18)}}的其他基金
耐食・耐磨耗・耐疲労特性改善のための浸窒焼入れ表面改質法の開発
开发氮化淬火表面改性方法以提高耐蚀性、耐磨性和抗疲劳性能
- 批准号:
19656187 - 财政年份:2007
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Exploratory Research
中性子回析による物体内部の3次元応力分布測定法の開発
开发利用中子衍射测量物体内部三维应力分布的方法
- 批准号:
15656182 - 财政年份:2003
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Exploratory Research
力学物性におけるマジックサイズ微細複合組織材料の強加工を利用した創製
利用机械性能的强加工创造神奇尺寸的精细复合结构材料
- 批准号:
08650810 - 财政年份:1996
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
アルミニウム拡散浸透処理によるTi/Al_3Ti傾斜機能材料の作製
铝扩散渗透处理制备Ti/Al_3Ti功能梯度材料
- 批准号:
08243215 - 财政年份:1996
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
素粉末反応焼結法により作製したTiAl基複合材料の変形と破壊
原粉反应烧结法制备TiAl基复合材料的变形与断裂
- 批准号:
05223210 - 财政年份:1993
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
延性2相鋼の低サイクル疲労特性
延性双相钢的低周疲劳性能
- 批准号:
56750515 - 财政年份:1981
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
延性2相鋼の疲労特性におよぼす予加工の影響
预加工对球墨双相钢疲劳性能的影响
- 批准号:
X00210----475564 - 财政年份:1979
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
延性2相合金の変形挙動
延性两相合金的变形行为
- 批准号:
X00210----375403 - 财政年份:1978
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
二相混合組織合金の強度と変形機構に関する研究
双相混合结构合金强度及变形机制研究
- 批准号:
X00210----175401 - 财政年份:1976
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
相似海外基金
Utilization of unused iron resources for resource and energy saving
利用未利用的铁资源节约资源和能源
- 批准号:
20J10432 - 财政年份:2020
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for JSPS Fellows
優先順位に基づく保健活動を推進するスクラップ&ビルド実践ガイドラインの開発
制定废旧建造实践指南,以促进基于优先事项的卫生活动
- 批准号:
19K11183 - 财政年份:2019
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Impurity control through a cyclic use of steel towards high-value additive recycling
通过循环使用钢材实现高价值添加剂回收来控制杂质
- 批准号:
18H04147 - 财政年份:2018
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research (A)
ニッケル基超合金スクラップからレニウムをリサイクルする新技術の開発
镍基高温合金废料中回收铼新技术的开发
- 批准号:
18J14731 - 财政年份:2018
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for JSPS Fellows
占領初期沖縄における「チャイナ部隊」と米・中関係
占领初期冲绳的“中国力量”与中美关系
- 批准号:
18K01973 - 财政年份:2018
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Development of an upgrade recycling method for metallic scraps into long objects with various cross sections
金属废料升级为各种截面长形物体的回收方法开发
- 批准号:
18K11718 - 财政年份:2018
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Laser Plasma Control by Short/Long Pulse Coaxial Dropping for Metal Scrap Sorting
通过短/长脉冲同轴下降进行激光等离子体控制,用于金属废料分类
- 批准号:
17K00620 - 财政年份:2017
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Construction of a sustainable recycling system for metals
构建可持续金属回收体系
- 批准号:
15H02860 - 财政年份:2015
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Monitoring system for international trade of metal resources
金属资源国际贸易监测系统
- 批准号:
15K16157 - 财政年份:2015
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Young Scientists (B)
Development of the sorting system using laser 3D shape measurement technique
使用激光 3D 形状测量技术开发分拣系统
- 批准号:
15H02851 - 财政年份:2015
- 资助金额:
$ 1.41万 - 项目类别:
Grant-in-Aid for Scientific Research (B)