Studies of Increase in Load-Carrying Capacity of Power Transmitted Biodegradable Oil
输电生物降解油提高承载能力的研究
基本信息
- 批准号:15560125
- 负责人:
- 金额:$ 2.37万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Scientific Research (C)
- 财政年份:2003
- 资助国家:日本
- 起止时间:2003 至 2004
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
The scoring-load capacities of the vegetable oils with anti-wear additive of Phosphoric Acid-Dibutyl (DBPo) were studied by using a power-circulating gear test rig. The tests were carried out under a slash-pan lubrication. From the tests, the following results were obtained. (1) The scoring-load capacities of the vegetable oils increased in following order : Turbine oil<Corn oil<Soybean oil<Rapeseed oil. The normal load per unit face width, Pn, at the incipient stage of scoring when lubricated with the rapeseed oil was approximately 1.7 times as large as that when lubricated with a turbine oil. (2) With respect to the vegetable oils with DBPo additive, surface failure by scoring didn't occur at the final load range in tests. The increases in the scoring-load capacities of rapeseed oil, corn oil and soybean oil with DBPo additive were over 78N/mm, over 378N/mm and over 449N/rnm, respectively. (3) The critical temperature at a risk for scoring with the rapeseed oil was about 400℃, and was the highest of all test oils. On contrast, the critical temperature with the vegetable oils with DBPo additive exceeded about 400℃.
利用动力循环齿轮试验机研究了添加二丁基磷酸(DBPo)抗磨剂的植物油的抗划伤能力。试验是在斜盘式润滑条件下进行的。从试验中获得了以下结果。(1)植物油的减载能力依次为:涡轮机油<玉米油<大豆油<菜籽油。当用菜籽油润滑时,划痕初期阶段每单位面宽的法向载荷Pn约为用涡轮机油润滑时的1.7倍。(2)添加DBPo的植物油在试验的最后载荷范围内没有发生表面划痕破坏。添加DBPo后菜籽油、玉米油和大豆油的抗氧化能力分别提高了78 N/mm以上、378 N/mm以上和449 N/mm以上。(3)菜籽油产生划痕的临界温度约为400℃,是所有试验油中最高的。而添加DBPo的植物油的临界温度超过400℃。
项目成果
期刊论文数量(2)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
灘野, 中迫, 河野, 南, 山口: "四球試験における植物油の耐焼付き性能に及ぼす耐摩耗添加剤の影響"日本機械学会論文集(C編). 70・690. (2004)
Nadano、Nakasako、Kono、Minami、Yamaguchi:“抗磨添加剂对四球试验中植物油抗咬合性能的影响”,日本机械工程师学会会刊(ed.C)。 2004)
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
NADANO Hiromasa其他文献
NADANO Hiromasa的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('NADANO Hiromasa', 18)}}的其他基金
Load Carrying Capacities of the Coated Gear in Ultra-high Vacuum and Establishment of Inspection System to Tooth Surface Failure.
涂层齿轮超高真空承载能力及齿面失效检测系统的建立。
- 批准号:
08650183 - 财政年份:1996
- 资助金额:
$ 2.37万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Load Carrying Capacities of the Stainless Steel Gears with Multiple Coating Layr in Ultra-high Vacuum
多层涂层不锈钢齿轮在超高真空中的承载能力
- 批准号:
06650183 - 财政年份:1994
- 资助金额:
$ 2.37万 - 项目类别:
Grant-in-Aid for General Scientific Research (C)
Study on Load Carrying Capacities of Gears with Multiple Layer
多层齿轮承载能力研究
- 批准号:
02650119 - 财政年份:1990
- 资助金额:
$ 2.37万 - 项目类别:
Grant-in-Aid for General Scientific Research (C)