Development of fundamental treatment for recycling wood resource
木材资源循环利用基础处理研究进展
基本信息
- 批准号:04556021
- 负责人:
- 金额:$ 5.12万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Developmental Scientific Research (B)
- 财政年份:1992
- 资助国家:日本
- 起止时间:1992 至 1993
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
Wood waste has been originally used for chip and fuel as a recycled raw material, but it recently tends to be dumped or burned as rubbish. This project aims to re-use the timber from demolished houses and used wood products effectively. Based from the results of this study, the following conclusions could be drawn :(1) Wood chip from the timber of demolished house has been used for particleboard. The quality of the particleboard was equal to that from virgin wood chip.(2) A rapid carbonizing method for used timber was developed. The two step carbonization could be more effective for removing nails and so on and for refining the charcoal.(3) A variety of used timbers, such as used colomn, glulam, chip, saw dust and decay wood, were carbonized, and then their ability of absorption and wettability tend to be increased in increasing carbonizing temperature.
木材废料最初作为回收原材料用于制作木片和燃料,但最近往往被当作垃圾倾倒或焚烧。该项目旨在有效地重新利用被拆除房屋的木材和废旧木制品。根据本研究的结果,可以得出以下结论:(1)被拆除房屋木材中的木片已被用于刨花板。刨花板质量与原生木片相当。(2)开发了废旧木材快速炭化方法。两步炭化可以更有效地去除钉子等和精制木炭。(3)各种废旧木材,如旧柱、胶合木、木片、锯末、腐木等经过炭化后,随着炭化温度的升高,其吸附性和润湿性趋于增强。
项目成果
期刊论文数量(5)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
有馬 孝礼(分担): "木造住宅の解体・廃棄とカスケード型利用木材学会分科会報告(1993)" 日本木材学会, 11 (1993)
有马隆吉(撰稿人):“木结构房屋的拆除/处理和梯级利用木材协会小组委员会报告(1993年)”日本木材协会,11(1993年)
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
有馬,孝礼: "木材利用による炭素貯蔵,住宅生産におけるCO_2放出と" 森林文化研究. 13. 109-119 (1992)
Arima, Takayoshi:“通过木材使用进行碳储存,住房生产中的 CO_2 排放”森林文化研究 13. 109-119 (1992)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
Takanori Arima: "Cascade-type utilization for waste from demolished house" Mokuzai Gakkai. (1993)
Takanori Arima:“拆迁房屋废物的梯级利用”Mokuzai Gakkai。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
有馬孝禮: "木材学会分科会報告 木造住宅の解体・廃棄とカスケード型利用" 日本木材学会, 10 (1993)
有马高成:“木材学会小组委员会的报告:木结构房屋的拆除/处理和梯级利用”日本木材学会,10(1993)
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
有馬孝礼: "木造住宅の解体・廃棄とカスケード型利用" 日本木材学会分科会, (1993)
有马隆吉:“木结构房屋的拆除/处理和梯级利用”,日本木材协会小组委员会,(1993)
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
ARIMA Takanori其他文献
ARIMA Takanori的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('ARIMA Takanori', 18)}}的其他基金
Fundamental research on charcolizaion and burning of multiple wooden wastes
多种木质废弃物炭化燃烧基础研究
- 批准号:
12460075 - 财政年份:2000
- 资助金额:
$ 5.12万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Design Evaluation of Creep and Mechano-sorptive Deformatic of Mechanical Joints
机械接头蠕变和力吸变形的设计评估
- 批准号:
06452364 - 财政年份:1994
- 资助金额:
$ 5.12万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Optimal technichal method for recycling wood resources
木材资源循环利用的优化技术方法
- 批准号:
04302057 - 财政年份:1992
- 资助金额:
$ 5.12万 - 项目类别:
Grant-in-Aid for Co-operative Research (A)
Improved living condition of concrete structure placing with wood-based material
改善木质材料混凝土结构的居住条件
- 批准号:
02556021 - 财政年份:1990
- 资助金额:
$ 5.12万 - 项目类别:
Grant-in-Aid for Developmental Scientific Research (B)
Effect of Joint Gaps and Partial Plastic Deformation on Stiffness in Timber Construction and its Probability Evaluation
木结构接缝间隙和局部塑性变形对刚度的影响及其概率评估
- 批准号:
01460232 - 财政年份:1989
- 资助金额:
$ 5.12万 - 项目类别:
Grant-in-Aid for General Scientific Research (B)
Classification of log based on sound analysis and its application for grading system and drying process control
基于声音分析的原木分级及其在分级系统和干燥过程控制中的应用
- 批准号:
63860021 - 财政年份:1988
- 资助金额:
$ 5.12万 - 项目类别:
Grant-in-Aid for Developmental Scientific Research
相似海外基金
Re4Rail: AI and digital twin-based automated technology to real-time repair, reuse, recycle and repurpose railway granular media
Re4Rail:基于人工智能和数字孪生的自动化技术,可实时修复、再利用、回收和重新利用铁路颗粒介质
- 批准号:
EP/Y015401/1 - 财政年份:2024
- 资助金额:
$ 5.12万 - 项目类别:
Fellowship
Seaweed derived Films to displace hard to recycle plastics
海藻衍生薄膜取代难以回收的塑料
- 批准号:
10075270 - 财政年份:2023
- 资助金额:
$ 5.12万 - 项目类别:
Grant for R&D
Automated Cooking Oil Storage and Recycle System
自动化食用油储存及回收系统
- 批准号:
10073449 - 财政年份:2023
- 资助金额:
$ 5.12万 - 项目类别:
Launchpad
Project TUPLA - traceability of used PLA across the supply chain from manufacturer to recycle
TUPLA 项目 - 从制造商到回收的整个供应链中使用过的 PLA 的可追溯性
- 批准号:
10062972 - 财政年份:2023
- 资助金额:
$ 5.12万 - 项目类别:
Collaborative R&D
Near Surface Geothermal Heat Battery : Sustainable Use of GeothermalHeat exploiting Legacy Mine workings to Transport Recycle Waste SurfaceHeat
近地表地热热电池:可持续利用地热,利用旧矿井运输回收废地表热
- 批准号:
2788797 - 财政年份:2023
- 资助金额:
$ 5.12万 - 项目类别:
Studentship
Integrating membrane processes into hydroponics systems to promote plant growth, recover added-value root exudates and recycle nutrients
将膜工艺集成到水培系统中,以促进植物生长、回收增值根系分泌物并回收养分
- 批准号:
EP/X018660/1 - 财政年份:2023
- 资助金额:
$ 5.12万 - 项目类别:
Research Grant
PFI-TT: Device to Recycle Scrap Cathodes in Lithium-Ion Battery Factories
PFI-TT:锂离子电池工厂废旧正极回收装置
- 批准号:
2314242 - 财政年份:2023
- 资助金额:
$ 5.12万 - 项目类别:
Standard Grant
Carbon recycle and development of seabed ground improvement technique using carbon dioxide mixed material hydrate
二氧化碳混合材料水合物碳回收及海底地基改良技术开发
- 批准号:
23H01503 - 财政年份:2023
- 资助金额:
$ 5.12万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Development of innovative resource recycle process of livestock biomass by anaerobic membrane bioreactor with direct interspecies electron transfer
通过直接种间电子转移厌氧膜生物反应器开发牲畜生物质的创新资源回收工艺
- 批准号:
23K05467 - 财政年份:2023
- 资助金额:
$ 5.12万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
Development of the Conform Process to Recycle Titanium Alloy Swarf into Wire for Sustainable Additive Manufacturing Feedstock
开发将钛合金切屑回收为可持续增材制造原料线材的 Conform 工艺
- 批准号:
2879603 - 财政年份:2023
- 资助金额:
$ 5.12万 - 项目类别:
Studentship














{{item.name}}会员




