粒界三重線での折出挙動に及ぼす結晶学的要因と相界面の特徴
影响晶界三重态析出行为的晶体学因素和相界面特征
基本信息
- 批准号:11123238
- 负责人:
- 金额:$ 0.64万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Scientific Research on Priority Areas (A)
- 财政年份:1999
- 资助国家:日本
- 起止时间:1999 至 无数据
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
2相ステンレス鋼ならびに2相チタン合金を用いて、それらの母相の結晶粒界の三重線とその近傍に核生成する第2相の形態および結晶学的特徴に関して研究を行った。その結果、結晶系が異なるいずれの合金においても共通した特徴があることが明らかとなった。すなわち、粒界三重点(線)およびその近傍への核生成では、3通りに形態が分類可能である。そして、結晶学的には、析出相が接する母相の3つの粒との整合性が重要であることを確認した。特に、粒界三重線上への核生成では粒界三重線を構成する2つ以上の粒界面との整合性が重要であることも見出した。さらに、粒界三重点(線)として観察される粒界エッジの方向も、析出相の結晶方位の決定に大きな影響を及ぼすことを示唆するデータが得られた。一方、粒界面上への核生成では、隣接する母相結晶粒の一つとの整合性が重要となる。さらに、3次元の単純な幾何学モデルが異相界面構造の視覚化に非常に役立つことを見出した。現在、このシュミレーション方法を改良し、結晶学的方位関係をinputすることにより、2相間の原子マッチングの良い界面を探し出すことが可能となった。そして、析出初期の、特定の方位関係を満足するような析出相の界面構造について、実験結果と良く対応することが確認された。この方法の大きな利点として、析出相が特定の方位関係からずれており(粒界析出相や粗大化した析出相などにしばしば観察される)、しかも、異相界面の直接観察が困難な場合に、界面構造が視覚化できる、という点があげられる。
The morphology and crystallographic characteristics of 2-phase alloys were studied. The result is that the crystal system is different from the alloy. The three points (lines) of the boundary of the grain are close to each other and the nuclear generation is possible. It is important to confirm the conformity of the three particles of the parent phase with the crystalline phase. In particular, the core formation on the grain boundary triplet is important because the grain boundary triplet is composed of more than 2 grains and the integration is important. The orientation of the grain boundary and the crystal orientation of the precipitate phase are determined by the influence of the crystal orientation on the crystal orientation. It is very important to form nucleus on the interface between crystal and grain, and to integrate the crystal grain of parent phase. In addition, three-dimensional pure geometry and visualization of out-of-phase interface structure are very important. Now, the method of crystallography is improved, and the orientation relationship of crystallography is explored. The initial phase of precipitation, the specific orientation relationship, the interface structure of precipitation phase, and the good relationship between precipitation phase and precipitation phase are confirmed. This method has a large advantage in that the orientation of the precipitated phase is different from that of the coarse precipitated phase, and the direct observation of the heterogeneous interface is difficult in that the interface structure is different from that of the visible one.
项目成果
期刊论文数量(1)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
宮野公樹,飴山惠: "3次元でのNear-Coincidense Site Laflice解析による2結晶間の結晶学的方位関係と異相界面構造の検討"日本金属学会誌. 64・1. 42-49 (2000)
Koki Miyano、Kei Ameyama:“通过三维近重合位点 Laflice 分析研究两种晶体之间的晶体取向关系和异相界面结构”,日本金属学会杂志 64・1(2000 年)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
飴山 惠其他文献
Improved stability of Ag thin films by utilizing Al nanolayers
利用铝纳米层提高银薄膜的稳定性
- DOI:
- 发表时间:
2019 - 期刊:
- 影响因子:0
- 作者:
増山 湧士;川畑 美絵;藤原 弘;山末 英嗣;飴山 惠;Midori Kawamura - 通讯作者:
Midori Kawamura
SUS316L調和組織材料の高温圧縮変形による組織変化と力学特性
SUS316L谐波结构材料高温压缩变形的显微组织变化及力学性能
- DOI:
- 发表时间:
2022 - 期刊:
- 影响因子:0
- 作者:
川畑 美絵;益野 颯仁;中谷 仁;藤原 弘;飴山 惠 - 通讯作者:
飴山 惠
純Ni調和組織材料の回復・再結晶挙動のEBSDによる解析
纯Ni调和结构材料的回复和再结晶行为的EBSD分析
- DOI:
- 发表时间:
2020 - 期刊:
- 影响因子:0
- 作者:
増山 湧士;川畑 美絵;藤原 弘;山末 英嗣;飴山 惠 - 通讯作者:
飴山 惠
CrMnFeCoNi高エントロピー合金調和組織材料の衝撃特性と微細組織変化
CrMnFeCoNi高熵合金调和结构材料的冲击性能及显微组织变化
- DOI:
- 发表时间:
2020 - 期刊:
- 影响因子:0
- 作者:
藤原 弘;松浦 友哉;感本 広文;川畑 美絵;飴山 惠 - 通讯作者:
飴山 惠
AlCrFeCoNi/CrMnFeCoNi高エントロピー合金の複合調和組織制御と力学特性
AlCrFeCoNi/CrMnFeCoNi高熵合金的复调和结构控制及力学性能
- DOI:
- 发表时间:
2022 - 期刊:
- 影响因子:0
- 作者:
藤原 弘;梶本 尚聖;川畑 美絵;飴山 惠 - 通讯作者:
飴山 惠
飴山 惠的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('飴山 惠', 18)}}的其他基金
不均一性の学理による構造用金属材料創成のパラダイムシフト
基于异质性原理的结构金属材料创建的范式转变
- 批准号:
24K01202 - 财政年份:2024
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
Study on deformation mechanisms of harmonic structure materials
调和结构材料变形机制研究
- 批准号:
18H03847 - 财政年份:2018
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Scientific Research (A)
非平衡PMプロセスによるナノ結晶粒組織制御と超塑性
非平衡粉末冶金过程的纳米晶结构控制和超塑性
- 批准号:
09228226 - 财政年份:1997
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
粒界三重点での析出挙動に及ぼす結晶学的要因と相界面の特徴
影响晶界三相点析出行为的晶体学因素和相界面特征
- 批准号:
09242241 - 财政年份:1997
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
二相合金における析出相の成長にともなう結晶回転と成長方向に関する結晶学的研究
两相合金中伴随析出相生长的晶体旋转和生长方向的晶体学研究
- 批准号:
03750562 - 财政年份:1991
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
(α+β)型,near-β型チタン合金およびその粉末の組織制御に関する研究
(α+β)型及近β型钛合金及其粉末组织控制研究
- 批准号:
63750744 - 财政年份:1988
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Encouragement of Young Scientists (A)
相似海外基金
相変態×水素誘起き裂発生・進展現象解明:高分解能X線CTと局所XRDの援用
阐明相变 x 氢致裂纹萌生和扩展现象:使用高分辨率 X 射线 CT 和局部 XRD
- 批准号:
23K25999 - 财政年份:2024
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
高圧相変態が拓くシリコン―ゲルマニウム合金の結晶多型と新奇物性解明
阐明高压相变开发的硅锗合金的晶体多态性和新的物理性能
- 批准号:
23K26405 - 财政年份:2024
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Scientific Research (B)
ベイズ推論とスパース回帰分析を用いた固相変態における不均一核形成挙動モデリング
使用贝叶斯推理和稀疏回归分析进行固相转变中的异相成核行为建模
- 批准号:
23K17829 - 财政年份:2023
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Challenging Research (Exploratory)
拡散-変位型相変態による巨大可逆歪みの発現と高温形状記憶材料の創出
通过扩散位移相变表达巨大可逆应变并创建高温形状记忆材料
- 批准号:
22K18899 - 财政年份:2022
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Challenging Research (Exploratory)
Al合金の電子ビーム積層造形とその相変態カイネティクス
铝合金电子束增材制造及其相变动力学
- 批准号:
21K03801 - 财政年份:2021
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
固相変態によるスコロダイトの生成
通过固相转变形成臭葱石
- 批准号:
21K04739 - 财政年份:2021
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Scientific Research (C)
摩擦攪拌接合部における加工誘起相変態の統一的理解と積極的活用
搅拌摩擦焊变形诱发相变的统一认识和积极利用
- 批准号:
21K14418 - 财政年份:2021
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for Early-Career Scientists
Relative State and the Evolutionary-Cognitive Processes of Risky Decision Making
相对状态和风险决策的进化认知过程
- 批准号:
553256-2020 - 财政年份:2020
- 资助金额:
$ 0.64万 - 项目类别:
Alexander Graham Bell Canada Graduate Scholarships - Master's
相変態を積極活用した新型超伝導センサ:高温超伝導コイルの高速異常検出に挑む
主动利用相变的新型超导传感器:高温超导线圈高速异常检测的挑战
- 批准号:
19J10989 - 财政年份:2019
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for JSPS Fellows
相変態および組織制御による超マグネシウム合金の開発
通过相变和结构控制开发超镁合金
- 批准号:
17J10094 - 财政年份:2017
- 资助金额:
$ 0.64万 - 项目类别:
Grant-in-Aid for JSPS Fellows














{{item.name}}会员




