A CASTING Pd-Co-Ag ALLOY WITH MAGNETICS
A CASTING Pd-Co-Ag ALLOY WITH MAGNETICS
批准号:
11671969
负责人:
OKAMOTO Yoshizou
金额:
$1.15万
依托单位:
依托单位国家:
日本
项目类别:
Grant-in-Aid for Scientific Research (C)
财政年份:
1999
资助国家:
日本
项目状态:
已结题
起止时间:
1999 至 2000
中文摘要
为了开发具有磁性的铸造合金,制备了三种高K贵金属合金:72wt%的Au-Co,75wt%的Au-Fe,40wt%的Pd-Co。所有这些合金都可以用气体/氧气火焰熔化。Pd-Co合金在固溶体中具有最均匀的结构和182.5gf的吸引力。在NaCl溶液中的耐腐蚀性能最好。12.7 μg/cm^2的Co离子被溶解到NaCl溶胶中。在37℃下放置7天。使用具有磁性的铸造合金似乎有一些优点,但在NaCl溶胶中没有检测到贵金属Au或Pd。制备了6种含Co或Fe的贵金属合金,并研究了这些合金的熔化性能、力学性能、磁力和显微组织。实验合金(No.6)由48wt%Pd、32wt%Co、14wt%Ag、3wt%Au、2wt%Zn和1wt%In组成,其熔点范围为1148-1192℃,硬度为197 Hv,抗拉强度为318 Mpa,伸长率为14%,吸力为415.0gf,铸态组织均匀,无气孔。
英文摘要
To develop a casting alloy with magnetics, three kinds of binary alloy were prepared as high-carat precious alloy, 72wt%Au-Co, 75wt%Au-Fe, 4Owt%Pd-Co by weight percent. All of these alloys could be fused by gas/oxygen flame. The Pd-Co alloy has the most homogeneous structure in a solid solution and a 182.5 gf attractive force. It also showed the highest corrosion resistance in NaCl sol. and 12.7 μg of Co ion/cm^2 was dissolved into the NaCl sol. at 37℃ for 7 days. It seems that there are some advantages in using a casting alloy with magnetics, but there were no precious metals, Au or Pd, detected in NaCl sol. from any of these alloys.Six kinds of precious metal alloys with Co or Fe were prepared and the melting properties, mechanical properties, magnetic forces and microstructures of these alloys were investigated. An experimental alloy (No.6) consists of 48wt%Pd, 32wt%Co, 14wt%Ag, 3wt%Au, 2wt%Zn and 1wt% In showed a melting range of 1148-1192℃, hardness of 197 Hv, tensile strength of 318 Mpa, elongation of 14%, attractive force 415.0 gf and a homogeneous structure without porosity when cast.
期刊论文(0)
专著(0)
科研奖励(0)
会议论文
海外基金