Basic Research on Large Flow Rate Micro Channel Gas Liquid Two Phase Flow
Basic Research on Large Flow Rate Micro Channel Gas Liquid Two Phase Flow
批准号:
18560192
负责人:
SHIKAZONO Naoki
金额:
$2.43万
依托单位:
依托单位国家:
日本
项目类别:
Grant-in-Aid for Scientific Research (C)
财政年份:
2006
资助国家:
日本
项目状态:
已结题
起止时间:
2006 至 2007
中文摘要
采用空气-水和空气-FC 3283实验装置,对液体夹带极限进行了实验研究。使用三角形和梯形横截面的微通道。通道长度,流速,入口质量变化的参数调查。在气相出口处测量夹带液滴的重量以评估液体夹带极限。液体夹带极限定义为当1%的入口液体流速作为液滴夹带在气相中时的最大流速。结果表明,利用液膜雷诺数、韦伯数和修正的邦德数可以很好地关联液体夹带极限。最后,提出了预测气液分离极限的无因次关联式。
英文摘要
In the present study, liquid entrainment limit was investigated experimentally by air-water and air-FC3283 experiment. The triangle and trapezoidal cross section micro channels were used. Channel length, flow rate, inlet quality were varied for the parametric survey. The weight of the entrained liquid droplets was measured at the gas phase exit to evaluate the liquid entrainment limit. The liquid entrainment limit is defined as the maximum flow rate when 1% of the inlet liquid flow rate was entrained as liquid droplets in the gas phase. As a result, the liquid entrain limit was correlated well using liquid film Reynolds number, Weber number, and modified Bond number. Finally, dimensionless correlations for predicting gas-liquid separation limits are proposed.
期刊论文(0)
专著(0)
科研奖励(0)
会议论文
登录
查看更多内容
表面張力を利用したコンパクト気液分離器の開発第二報 コンパクト気液分離器の実用化検討
利用表面张力开发紧凑型气液分离器的第二次报告紧凑型气液分离器的实际应用研究
DOI:
--
发表时间:
2006
期刊:
影响因子:
--
作者:
[岩田博, 小森徹矢, 度会和孝, 鹿園直毅]
通讯作者:
鹿園直毅
Development of Compact Liquid Gas Separator Using Surface Tension
利用表面张力开发紧凑型液气分离器
DOI:
--
发表时间:
2008
期刊:
Transactions of the Japan Society of Mechanical Engineers, Series B (in press)
影响因子:
--
作者:
[Azuma R, Shikazono, N., Iwata, H]
通讯作者:
H
表面張力を用いた気液分離器の相分離特性に関する研究
利用表面张力的气液分离器相分离特性研究
DOI:
--
发表时间:
2007
期刊:
影响因子:
--
作者:
[東隆平, 鹿園直毅, 岩田博, 度会和孝]
通讯作者:
度会和孝
Development of Compact Gas-Liquid Separator Using Surface Tension : Part 1 Basic Investigation of Gas-Liquid Separation Mechanism
利用表面张力开发紧凑型气液分离器:第 1 部分气液分离机理的基础研究
DOI:
--
发表时间:
2006
期刊:
影响因子:
--
作者:
[Shikazono, N., Mukasa, Y, Azuma, R. Iwata, H. and Watarai, K.]
通讯作者:
K.
表面張力を利用したコンパクト気液分離器の開発 第二報 コンパクト気液分離器の実用化検討
利用表面张力开发紧凑型气液分离器第二份报告紧凑型气液分离器的实际应用研究
DOI:
--
发表时间:
2006
期刊:
第40回空気調和・冷凍連合講演会講演論文集
影响因子:
--
作者:
[岩田, 小森, 度会, 鹿園]
通讯作者:
鹿園
共 11 条
Study on Nickel Sintering in Solid Oxide Fuel Cell Anode
-
批准号:23360093
-
项目类别:Grant-in-Aid for Scientific Research (B)
-
资助金额:$12.06万
-
财政年份:2011
-
负责人:SHIKAZONO Naoki
-
依托单位:
Experimental research on liquid film thickness in microchannel slug flow
-
批准号:20560179
-
项目类别:Grant-in-Aid for Scientific Research (C)
-
资助金额:$3.0万
-
财政年份:2008
-
负责人:SHIKAZONO Naoki
-
依托单位:
海外基金