Development of the new surface treatment to be suitable for a stainless steel separator for polymer electrolyte fuel cell

开发适用于聚合物电解质燃料电池不锈钢隔膜的新型表面处理

• 批准号: 22560732
• 负责人: HAGI Hideki
• 金额: $ 2.75万
• 依托单位: Fukui University of Technology
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Scientific Research (C)
• 财政年份: 2010
• 资助国家: 日本
• 起止时间: 2010 至 2012
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-22560732/
• 关键词: 表面・界面制御; 溶射・コーティング・粒子積層プロセス; 燃料電池; 金属セパレータ; 黒鉛; 表面処理; 水素; 冷間圧延; ステンレス鋼; 昇温脱離法; 水溶液腐食; 腐食寿命; 電気抵抗; セパレータ; SUS304ステンレス鋼

A commercially available fuel cell is too expensive, and cost reduction of it is required. Particularly, cost reduction of the separator is necessary. In this study, a new surface treatment has been applied to the separator of stainless steel, which is a candidate material for a low price separator, to improve electric conductivity. At first, we immersed stainless steel sheets in the mixture of alcohol and graphite powder to adhere graphite to the surface of stainless steel sheets uniformly. Then, the stainless steel was sandwiched with new stainless steel sheets and cold-rolled to adhere graphite powder strongly.

商业上可获得的燃料电池太昂贵，并且需要降低其成本。特别地，需要降低分离器的成本。在这项研究中，一种新的表面处理已被应用到不锈钢隔板，这是一个低价格的隔板的候选材料，以提高导电性。首先，我们将不锈钢片浸泡在酒精和石墨粉的混合物中，使石墨均匀地附着在不锈钢片表面。然后，将不锈钢与新的不锈钢片夹在一起并冷轧以牢固地粘附石墨粉末。