Micro-CHP using steam ejector/water turbine (WaterGen)

使用蒸汽喷射器/水轮机 (WaterGen) 的微型热电联产

• 批准号: 132154
• 金额: $ 13.39万
• 依托单位: UNIVERSITY OF NOTTINGHAM
• 依托单位国家: 英国
• 项目类别: Feasibility Studies
• 财政年份: 2016
• 资助国家: 英国
• 起止时间: 2016 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=132154
• 关键词: Micro; CHP; using; steam; ejector

The aim of the project is to develop an innovative and highly efficient, micro-CHP using steam ejector/waterturbine/Pelton wheel system. The technology can be used for heat and power provision in industrial andcommercial applications. The low cost system would reduce carbon reduction by the utilisation of renewableenergy sources, waste heat or hybrid sources (e.g., waste heat/natural gas). The micro-CHP system will employwater as the working fluid and also addresses the fundamental UK energy supply problems. WaterGen systemcould be rapidly introduced to reduce the UK generating gap and improve the energy supply security throughbuffering the intermittent output of renewables.

该项目的目的是开发一种使用蒸汽喷射器/水轮机/冲击轮系统的创新且高效的微型CHP。该技术可用于工业和商业应用中的供热和供电。低成本系统将通过利用可再生能源、废热或混合能源（例如，废热/天然气）。微型热电联产系统将采用水作为工作流体，也解决了英国能源供应的基本问题。可以迅速引入WaterGen系统，通过缓冲可再生能源的间歇性输出，减少英国的发电缺口，提高能源供应安全性。