Self Powered Door Opening System Removing Contact & Transmission Points for Both Covid-19 & Infectious Diseases / Harmful Bacteria In Food & Drink, Healthcare & Hospitality

自供电开门系统移除触点

• 批准号: 58892
• 金额: $ 5.96万
• 依托单位: CLH ENGINEERING LTD
• 依托单位国家: 英国
• 项目类别: Feasibility Studies
• 财政年份: 2020
• 资助国家: 英国
• 起止时间: 2020 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=58892
• 关键词: Self; Powered; Door; Opening; System

A solution to avoid contact with door handles and push plates in high traffic areas, reducing transmission of infectious diseases and harmful bacteria in light of problems facing health care, food and drink manufactures and other key businesses during Covid-19 Pandemic along with pre-existing hygiene challenges.Mechanical opening and self closing of doors. No external power supply or batteries and is easily and quickly retrofitted to existing doors with minimal modifications and simple DIY skills.Our aim is to maintain the physical barriers that only a solid door can provide while offering the quick opening convenience of automatic doors at significant reduction in cost and complexity.Our objectives and outcomes for the project are as follows:- Simple installation to any type of pedestrian swing door by a person with basic DIY skills.- Using known technology where possible to enable rapid prototype and launch to market, realising the benefits during the current pandemic. Also offering continued reduction in contact points for a safer future- Minimal environmental impact through power free operation, sustainable material selection and adaptable design requiring no site surveys. This reduces load on environment in the long term and reduces people interaction for the immediate future during pandemic.- Full design manufacture and installation document pack should the product be required to be produced under license to meet rapid demand.- Identify areas of use for future development to improve health and safety through manual handling improvements.- Identify and adapt for use in ease of access areas which removes need for power and large installation costs currently experienced.- Product produced with minimal risk to staff and public during this difficult period.

针对新冠肺炎疫情期间医疗保健、食品饮料制造等关键行业面临的问题以及预先存在的卫生挑战，避免在高流量区域接触门把手和推板，减少传染病和有害细菌的传播的解决方案。门的机械打开和自动关闭。没有外部电源或电池，只需最少的修改和简单的DIY技能，就可以轻松快速地改装到现有门上。我们的目标是保持只有坚固的门才能提供的物理屏障，同时提供自动门的快速打开便利，同时显著降低成本和复杂性。我们的项目目标和结果如下：-具有基本DIY技能的人可以简单地安装任何类型的行人旋转门。-尽可能使用已知技术来实现快速原型和投放市场，实现在当前大流行期间的好处。还提供持续减少的接触点，以实现更安全的未来-通过无电操作、可持续的材料选择和不需要现场勘测的适应性设计，将对环境的影响降至最低。从长远来看，这减少了环境的负荷，并在大流行期间减少了人们在不久的将来的互动。-完整的设计、制造和安装文件包应要求产品在获得许可证的情况下生产，以满足快速需求。-确定未来开发的使用领域，通过改进人工处理来改善健康和安全。-确定并适应在容易进入的地区使用，消除对电力的需求和目前经历的巨额安装成本。-在这一困难时期生产的产品对员工和公众的风险最小。